The company premises of Continental AG in Hanover from the outside

Accolade for an intelligent monitoring tool

In times of increasingly professionalised cyber attacks, the importance of secure network components is growing exponentially. This is one reason why internet-enabled products are thoroughly scrutinised by customers before they are used. KSB’s cloud-based KSB Guard was examined by the rubber and plastics specialist ContiTech, and passed the validation with flying colours. This achievement almost overshadowed the fact that the main contract involved the refurbishment and modernisation of an entire cooling water system.

The project: Renewing the cooling water supply system

2017 saw ContiTech invite tenders for the renewal of the cooling water supply system at its Hanover Vahrenwald factory. The company planned to refurbish and modernise the cooling water system in the entire factory, as well as making it energy-efficient. The work included the renewal of pumps, motors, frequency inverters, shut-off and non-return valves; the installation of prefabricated piping; the construction of pump foundations and baseplates; and the removal of the old pump sets.

The customer: ContiTech

Hanover-based ContiTech is one of the world’s largest manufacturers of rubber and plastic products outside the tyre industry and is part of Continental. In 40 countries, the technology company’s 46,000 employees develop and produce functional parts, components and systems for almost all sectors of industry and commerce and combine them with individual services.

Pumps, piping, sensors and frequency inverters of ContiTech AG’s cooling system — Etanorm pumps with PumpDrive and KSB Guard

The challenge: Intelligent, reliable and secure monitoring solution

It was planned to implement an intelligent and above all reliable and secure monitoring solution to continuously monitor the operation of all pumps and to report potential irregularities in good time before a failure actually occurs. A further challenge was the fact that production at the Vahrenwald factory runs almost around the clock, only stopping for few national holidays. The tender specified that work on the pump systems had to be carried out during ongoing operation without any downtime in production.

The solution: Experience and highest safety standards

When submitting its quotation, KSB was able to refer to its many years of experience and a full range of services as a single-source supplier. A further advantage is that KSB operates a global network of service partners. In its subsidiary Dynamik-Pumpen GmbH, KSB has a reliable and experienced service company available locally and able to provide services around the clock if needed at a later stage.

When drawing up its detailed design implementation plans, Dynamik-Pumpen GmbH went beyond the stipulations set out in the tender documents. After receiving the order, KSB’s specialists made an extensive analysis of the old system. This yielded further important details which complemented ContiTech’s well thought-out specifications and enabled KSB’s experts to maximise the reliability, security and energy efficiency of the entire system while staying within the budget.

As to the choice of pumps, KSB decided to opt for the high-performance Etanorm, the world’s best-selling standardised water pump. It is known for its impressive efficiency and extremely robust and durable motors. Etanorm was supplemented with PumpDrive, a frequency inverter that dynamically adapts pumps’ output and speed to actual demand, making them extremely energy-efficient and reliable to operate. In addition, Etanorm features extremely smooth running characteristics which met ContiTech’s requirement to significantly reduce noise levels on site.

Pumps, pipes and valves of ContiTech AG’s cooling system — Etanorm pumps and new piping

In order to meet the requirement of removing old and installing new equipment without interrupting production, KSB supplied large prefabricated piping sections that could be integrated with the pumps, valves and other components already on site to replace the old equipment.

All areas at ContiTech are subject to strict regulations and guidelines. But having to meet demand criteria is nothing new for KSB pumps and valves, and these products are generally well ahead of their time in terms of meeting exacting standards.

The OK for the installation of KSB Guard came immediately. The security measures integrated into the KSB Cloud and all hardware components proved 100% convincing because they guarantee a level of security comparable with online banking by using maximum data encryption and actively blocking potential external attacks.

But what makes KSB Guard so unique? The innovative and easy-to-install monitoring system includes sensors that detect irregularities in KSB pumps and third-party products before a malfunction occurs so that major damage and failures can be reliably avoided. Registered users can access all pump status data (e.g. temperature, vibrations and load condition) around the clock via a web portal and are immediately notified by e-mail if any deviations occur.

The system operator benefits from predictable and less frequent downtimes, better maintenance strategies and significantly reduced operating costs for a relatively modest investment.

Pumps, piping and valves of ContiTech AG’s cooling system — Etanorm pumps with attached KSB Guard

Data I Facts I Figures

System:
Cooling water supply, Vahrenwald factory

End user:
ContiTech AG

Project data:

6x Etanorm 100-80-315 with 45kW synchronous reluctance motor, PumpDrive and KSB Guard

Products used

Etanorm/Etanorm MyFlow/Etanorm Pro

Dokumenter

Ettrinns spiralhuspumpe i blokkonstruksjon, med ytelser iht. EN 733, med IEC-kompatibelt drivsystem PumpDrive med SuPremE eller PumpDrive 3 i effektivitetsklasse IE4/IE5 iht. IEC TS 60034-2-3:2016 og motorintegrert frekvensomformer. Pumpen har utskiftbare spalteringer, lukket radialhjul med buede skovler, enkelt- samt dobbeltglideringstetninger i henhold til EN 12756, aksel i akseltetningsområdet med utskiftbar akselbeskyttelseshylse. Prosesstypen gjør det mulig å demontere kuppelen, lagerbraketten og løpehjulet, uten at pumpehuset må kobles fra rørledningene. Festepunkter i henhold til IEC 60072, dimensjoner i henhold til DIN V 42673 (07-2011). ATEX-utførelse tilgjengelig. Langt foran effektivitetskravene i ErP-direktivet.

Detaljer

PumpDrive 2/PumpDrive 2 Eco

Dokumenter

Selvkjølt frekvensomformer med modulær oppbygging som muliggjør en trinnløs turtallsendring av asynkrone og synkrone reluktansmotorer via analoge normsignaler, feltbuss eller betjeningsenhet. Takket være selvkjølingen til PumpDrive er det mulig med montering på motoren, på veggen samt i et koblingsskap. Regulering av opptil seks pumper uten ekstra regulator.

Detaljer

KSB Guard

Dokumenter

Smartere og mer omfattende monitoring-tjeneste for pumper og andre roterende maskiner – tilgjengelig døgnet rundt og produsentuavhengig. Predictive Maintenance i samarbeid med KSB, og dra fordel av omfattende innsyn, økt tilgjengelighet, mer driftssikkerhet og effektiv drift (av uregulerte pumper). Viktige driftsdata som vibrasjoner, temperatur, driftstimer og belastningstilstand (for uregulerte pumper) er tilgjengelige til enhver tid og overalt med KSB Guard. Hvis det oppstår et avvik fra normal drift, sendes det straks et varsel via KSB Guard-nettportalen/-appen. I tillegg gir ekspertene fra KSB Monitoring-senteret støtte med årsaksanalysen.

Detaljer