Country, region and language selection

International websites

ksb.comENDE

Europe

Americas / Oceania

Africa and Middle East

Asia / Pacific

Amacan P Submersible pump in discharge tube

Submersible pump in discharge tube Amacan P

Wet-installed submersible motor pump for installation in discharge tubes, with axial propeller in ECB design, single-stage, single-entry. ATEX-compliant version available.
모든 문서와 다운로드 보기

주 사용 용도

  • Irrigation pumping stations
  • Drainage pumping stations
  • Stormwater pumping stations
  • Raw water pumps and clean water pumps in waterworks and waste water treatment plants

기술 데이터

Maximum flow rate TSG
25200 m3/h
Maximum head TSG
12 m
Max allowed fluid temp TSG
40 °C

KSB 연락처: 항상 고객을 지원합니다.

올바른 제품 번호를 찾는 데 도움이 필요하십니까?
직접 주문이 가능하도록 빠른 시일 내에 컨텐츠를 제공할 예정입니다.
그동안 저희 지원팀에 문의해 주시기 바랍니다.

Your local contact
Your KSB contact : We’re here to support you

혜택

  • The pump’s own weight ensures self-centring seating in the discharge tube, and an O-ring seals it; quick to install or remove.
  • The slim motor keeps discharge tube flow losses down.
  • High reliability thanks to bearing temperature monitoring, vibration sensor, thermal motor protection, leakage sensors in the motor space and connection space as well as leakage monitoring of the mechanical seal system.

기술 데이터

Drive concept
With electric actuator
Maximum flow rate TSG
25200 m3/h
Minimum flow rate TSG
0.1 m3/h
Maximum head TSG
12 m
Minimum head TSG
0.1 m
Mains frequency
50 Hz,
60 Hz
Mains voltage
380 V,
400 V,
460 V
Nominal pressure Outlet
PN 16
Suction behaviour
Non-self-priming
Max allowed fluid temp TSG
40 °C
Min allowed fluid temp TSG
2 °C