
Vital artery in the multifunctional building complex of the future
Equipping architectural flagship projects is an honour and a challenge for all companies involved. Even if – like KSB – you have achieved important milestones in countless infrastructure projects in the past, this doesn’t usually come to the attention of the public. In the case of the “Das Quartier Q 6 Q 7” multifunctional building complex in Mannheim, however, there was no doubt that everyone would be watching to see whether all of the systems would be working reliably in the city’s new multifunctional complex.
Equipping architectural flagship projects is an honour and a challenge for all companies involved. Even if – like KSB – you have achieved important milestones in countless infrastructure projects in the past, this doesn’t usually come to the attention of the public. In the case of the “Das Quartier Q 6 Q 7” multifunctional building complex in Mannheim, however, there was no doubt that everyone would be watching to see whether all of the systems would be working reliably in the city’s new multifunctional complex.
The project:
Building services systems for “Das Quartier Q 6 Q 7”
The client:
DIRINGER & SCHEIDEL (D&S) and “Das Quartier Q 6 Q 7 Mannheim"
Etanorm pumps with PumpDrive2 in the heating plant room
The challenge:
Wide variety of products from a single supplier
The solution:
Complete portfolio of building services equipment
KSB FlowManager: Access to all important PumpDrive2 parameters
PumpDrive2 can also be configured directly on the device.
Data | Facts | Figures
Used products
Calio
Maintenance-free high-efficiency flanged or screw-ended glandless pump with high-efficiency electric motor and continuously variable differential pressure control.
Etaline
Single-stage volute casing pump in in-line design, with magnetless KSB SuPremE motor of efficiency class IE4/IE5 and PumpDrive variable speed system; pump shaft and motor shaft are rigidly connected. With KSB SuPremE, a magnetless synchronous reluctance motor (exception: motor sizes 0.55 kW / 0.75 kW with 1500 rpm are designed with permanent magnets) of efficiency class IE4/IE5 to IEC TS 60034-30-2:2016, for operation on a KSB PumpDrive 2 or KSB PumpDrive 2 Eco variable speed system without rotor position sensors. Motor mounting points in accordance with EN 50347, envelope dimensions in accordance with DIN V 42673 (07-2011). ATEX-compliant version available.
Etanorm
Horizontal volute casing pump, single-stage, with ratings and main dimensions to EN 733, long-coupled, back pull-out design, with replaceable shaft sleeves / shaft protecting sleeves and casing wear rings, with motor-mounted variable speed system. With KSB SuPremE, a magnetless synchronous reluctance motor (exception: motor sizes 0.55 kW / 0.75 kW with 1500 rpm are designed with permanent magnets) of efficiency class IE4/IE5 to IEC TS 60034-30-2:2016, for operation on a KSB PumpDrive 2 or KSB PumpDrive 2 Eco variable speed system without rotor position sensors. Motor mounting points in accordance with EN 50347, envelope dimensions in accordance with DIN V 42673 (07-2011). ATEX-compliant version available.
Compacta
Floodable single-pump sewage lifting unit or dual-pump sewage lifting unit for automatic disposal of waste water and faeces in buildings and building sections below the flood level.
AmaDrainer 4 / 5/AmaDrainer 80 / 100
AmaDrainer 4../5..: Vertical single-stage fully floodable submersible motor pump in close-coupled design, IP68, with or without level control, max. immersion depth: 7 m. AmaDrainer 80/100: Vertical single-stage fully floodable submersible motor pump in close-coupled design, IP68, with or without level control, max. immersion depth: 10 m.