The challenge waste water poses: trouble-free, efficient disposal
Absolute reliability is essential in plants for waste water disposal. At the same time, the pumps and valves used must be energy-efficient in order to keep total cost of ownership low. A difficult undertaking considering that the waste water volumes to be transported and disposed of are increasing worldwide.
In addition, the composition of waste water is becoming increasingly problematic: as a result of water-saving measures, waste water contains more and more solids and less and less water. This requires innovative solutions and advanced technology. The pumps employed must have a long service life, must not clog and should be as energy-efficient as possible. Industrial waste water also places exacting demands on pumps and valves. They must be particularly resistant to wear and corrosion.
KSB ensures your waste water is disposed of reliably and efficiently
The waste water pumps offered by KSB for waste water transport and waste water disposal applications ensure trouble-free operation at all times. Products from KSB make economic and energy-saving operation possible, even under extreme conditions. Together we can optimise your system and reduce your operating costs systematically.
For municipalities, cities and industrial companies, KSB offers comprehensive solutions for waste water transport applications. Whatever the application – surface drainage, stormwater disposal or the transport of aggressive industrial waste water – KSB’s low-maintenance pumps and valves will ensure reliable and efficient transport and disposal of your waste water, for example as sewage lifting units and waste water lifting units.
KSB’s portfolio also includes products for residential areas with high groundwater levels or for buildings in water protection areas.
Innovative and high-efficiency waste water disposal – that is what KSB stands for
Waste water pumps from KSB feature efficient drives, non-clogging impellers and wear-resistant materials. The materials developed in KSB’s materials laboratory are capable of withstanding corrosive and abrasive waste water with a high solids content. Durable components capable of providing decades of reliable service under the harshest conditions are essential for keeping costs down for waste water transport in the long term.
With a wide range of different waste water pump designs, KSB is capable of supplying the right product for every system requirement. The Amarex KRT submersible pump and the Sewatec dry-installed waste water pump, for instance, are designed with non-clogging impellers and large free passages to ensure that even highly solids-laden waste water is handled efficiently. The Amajet system can be employed wherever tanks and storage sewers require cost-efficient cleaning. The portfolio is complemented by reliable valves such as the HERA-BDS knife gate valve which can be used to shut off pipes during maintenance work.
In addition, KSB’s application specialists are available to support consultants, engineering contractors and operators with a comprehensive range of engineering services such as computational fluid dynamics analyses (CFD). In the run-up to the project, model tests offered by KSB can help optimise system characteristics such as inlet conditions or flow velocity in the intake chamber. KSB Helps and KSB EasySelect are intelligent software solutions that enable optimum pump selection.
To complete this comprehensive portfolio, KSB offers extensive experience with large-scale projects gained over decades on the market. Proof for this expertise can be found in Europe’s deepest waste water pumping station in Saint Petersburg which uses efficient waste water pumps from KSB.
Centred-disc butterfly valve, sealed by elastomer liner (EPDM XC or Nitrile K), with lever, manual gearbox, pneumatic or electric actuator; semi-lug body (T2), full-lug body (T4). Body types T2 and T4 are suitable for downstream dismantling and dead-end service. Valve disc made of nodular cast iron or stainless steel. Connections to EN.
Diaphragm valve to DIN/EN with flanged ends; shut-off and sealing to atmosphere by diaphragm; hydraulically favourable body with or without lining, position indicator with integrated stem protection. DN 125 to DN 200 with threaded bush. All moving parts are separated from the fluid by the diaphragm. Maintenance-free.