Country, region and language selection

International websites

Europe

Americas / Oceania

Africa and Middle East

Asia / Pacific

BOA-CVE C/CS/W/IMS/EKB/IMS EKB Globe valve

Globe valve BOA-CVE C/CS/W/IMS/EKB/IMS EKB

Control valve to DIN/EN based on standard type series BOA-Compact, BOA-SuperCompact, BOA-W, BOA-Compact EKB, BOA-Compact IMS EKB, BOA-Control IMS and BOA-Control IMS EKB, bonnetless pressure-retaining body, soft-seated. Leakage rate selectable from 0.05 % to drop-tight, Kvs values between 6.3 and 700 m³/h and closing pressures of up to 16 bar. With intelligent microprocessor-controlled and pre-set electric actuators providing actuating forces from 1000 N to 14,000 N; electronic configuration of flow characteristic, Kvs value, actuating signal and actuating time using PC tool or manual parameterisation unit. Customised configuration can be implemented at the KSB factory on request.
See all documents and downloads

Main Applications

  • BOA-CVE C / BOA-CVE CS / BOA-CVE W:
  • Hot-water heating systems
  • Air-conditioning systems
  • Heat recovery systems

Technical Data

Nominal pressure Hydr casing
PN 6, PN 10, PN 16
Maximum nominal size TSG
DN 200
Max allowed fluid temp TSG
120 °C

Your KSB contact: We’re here to support you

Do you need any assistance finding the right material number?
We’ll soon provide a list so you can directly place your purchase order.
Meanwhile please contact our support:

Your local contact


Your KSB contact : We’re here to support you

Benefits

  • Individually programmable actuators programmed at the factory, for optimum adaptation to all applications
  • Maintenance-free design with stem sealed by EPDM profile ring
  • Soft-seated valve disc enables drop-tight shut-off.

Technical Data

Component function
Shut off/control flow
Connection type Inlet
Flange
Design concept Drive
With electric actuator
Mains frequency
50 Hz
Mains voltage
24 V,
230 V
Mtrl Hydraulic casing
EN-GJL-250,
EN-GJL-250-EKB
Nominal pressure Hydr casing
PN 6,
PN 10,
PN 16
Maximum nominal size TSG
DN 200
Minimum nominal size TSG
DN 15
Max allowed fluid temp TSG
120 °C
Min allowed fluid temp TSG
-10 °C

Sectional Drawings