
Sản xuất dược phẩm và mỹ phẩm
Làm đẹp bảng cân đối của quý vị: Bơm vệ sinh và van của KSB cho các quy trình vô trùng
Các yêu cầu cao nhất về vệ sinh và chất lượng được áp dụng cho sản xuất mỹ phẩm và dược phẩm. KSB cung cấp các giải pháp hiệu quả và đáng tin cậy cho mọi yêu cầu.
Trong sản xuất dược phẩm và mỹ phẩm, cần kiểm soát độ tin cậy và chi phí
Máy bơm vệ sinh từ KSB được sử dụng trong các nhà máy xử lý nước dược phẩm
Sản phẩm của KSB cho sản xuất dược phẩm và mỹ phẩm: an toàn, linh hoạt, bền bỉ
Chất lượng sản phẩm cao nhất phục vụ nhu cầu cao nhất trong sản xuất mỹ phẩm và dược phẩm
Máy bơm dược phẩm của KSB được làm từ vật liệu hoàn hảo về mặt vệ sinh và tương thích với CIP/SIP. Chúng xử lý, chuyển tải và định lượng môi trường lỏng và có độ nhớt cao đặc biệt nhẹ nhàng – và do đó đáp ứng một tiêu chí chất lượng nâng cao.
Tại KSB, một "đội LSA" (ứng dụng sự sống) đặc biệt sẽ giải quyết các nhu cầu của quý vị. Đội ngũ này đã được đào tạo để đáp ứng các yêu cầu trong lĩnh vực dược phẩm và mỹ phẩm và c ó nhiều bí quyết ứng dụng.
Chất lượng được chứng nhận
Vitalobe
Sturdy rotary lobe pump in hygienic design, bi-directional operation possible, horizontal or vertical orientation of connections. Hygienic design, excellent CIP/SIP compatibility due to its almost complete lack of dead volume or narrow clearances. All wetted components made of 1.4404/1.4409 (AISI 316L/CF3M) stainless steel; various rotor types, shaft seals and process connections available. Installed as a pump set with gear unit and standardised motor. Vitalobe is EHEDG-certified. The pump elastomers comply with the FDA standards and EN 1935/2004. Accessories include a trolley, a heatable casing or casing cover and a pressure relief arrangement. ATEX-compliant version available.
SISTO-C
Diaphragm valve with butt weld ends or clamps; in straight-way, Y or T pattern, or as a multi-port valve; shut-off and sealing to atmosphere by confined and supported diaphragm. No dead volumes, suitable for sterilisation, SIP/CIP-compliant design, position indicator. All moving parts are separated from the fluid by the diaphragm. Maintenance-free.
KE
Centred-disc butterfly valve with ISO 5211 compliant square shaft end and PFA liner. With lever, manual gearbox, pneumatic or electric actuator. With wafer-type body (T1), full-lug body (T4) or U-section body with raised faces (T6). EN, ASME, JIS connections possible.
MIL 21000
Top-guided single-ported heavy post-guided control valve for a wide temperature range.








