More water pressure for Münsterland
Maintaining a high level of drinking water quality has been a top priority in Germany for decades, and almost all water supply utilities deliver this on a reliable basis. But another factor plays an equally important role in water supply: pressure. While water pressure drops and strong fluctuations are certainly a nuisance, they can also cause damage to appliances and equipment in households and industry. In order to avoid this, many water supply utilities have to adapt their pumping equipment to changing demand levels.
The project: Supplying Stadtlohn with sufficient water pressure
Stadtlohn’s utility SVS-Versorgungsbetriebe was struggling with fluctuating water pressure. At peak load times, water supply could no longer be guaranteed. Following a pressure drop of approx. 1 bar lasting over 3 hours, the decision was finally taken to redesign the clean water pumping station at the Stadtlohn-Hundewick waterworks. An additional objective was to achieve energy savings for the clean water pumps.
The customer: SVS-Versorgungsbetriebe
SVS-Versorgungsbetriebe provides the public energy and drinking water supply for the towns of Stadtlohn, Vreden and Südlohn (hence the name SVS), which are located in the western Münsterland region in the northwest of North Rhine-Westphalia. As well as providing electricity, natural gas and fibre-optic lines, SVS-Versorgungsbetriebe delivers an average of 2.9 million m³ of water per year to the local population as well as to industry, trade and agriculture via a network of pipelines stretching over 472.2 km.
The challenge: Optimum water transport in confined spaces
The supply networks Stadtlohn and Südlohn lacked sufficient drinking water reserves. When quantities of around 400 – 440 m³/h were required, pressure dropped to 32 mWC and the clean water pumps were unable to transport the required quantity, despite the head of 42 mWC being clearly below their design point which at the time was known to be 54 mWC. The redesign also had to account for the extremely limited space available in the waterworks, which ruled out most horizontally installed pumps on the market.
The solution: Proven pumps with state-of-the-art control technology
The engineering company H2U was entrusted with the task of performing a fault analysis and developing a new plan. An extensive review of the performance data and an energy efficiency analysis of the waterworks yielded the following insights: The system lacked redundancy, offered unfavourable efficiencies and could not cope during high-demand periods as the pumping station was not designed for flow rates of more than 60 m³/h – even though these occurred 15% of the time.
The engineers decided to modify the piping and flow rates, with the work being carried out by the company A+H Anlagentechnik. The following factors were of primary importance: The system needed to become more flexible and energy efficient while offering a higher level of redundancy. In the Multitec V, KSB was able to offer a very efficient pump with frequency inverter (FI) which can also be operated via the latest high-tech interfaces. In addition, the pump can be installed vertically and thus fit perfectly into the confined space available. From a cost-benefit perspective, this was the best solution on the market.
The entire waterworks now employs KSB SuPremE® motors controlled by frequency inverters. The water flow rates of the pumps controlled via frequency inverters can be read on the PumpDrive display. The frequency inverters can be operated very easily by means of a multi-line display and can also be set via Bluetooth using a smartphone. Using KSB SuPremE® motors also delivered the desired energy savings. Here, the frequency inverters are additionally used to calculate the pumped flow rates, removing the need to purchase electromagnetic flow meters.
The cooperation of all parties involved went so well that KSB has already converted another waterworks in Vreden to using KSB SuPremE® motors, PumpDrive 2 and KSB Guard.
Figures I Data I Facts
System: Waterworks
End user: SVS-Versorgungsbetriebe
Project data:
- 2x Multitec V
- 3x Etanorm
- 5x PumpDrive
- 5x PumpMeter
- 5x KSB Guard
Products used
Etanorm
卧式蜗壳泵,单级,额定功率和主要尺寸符合 EN 733 标准,带轴承托架,背抽式设计,带可更换轴套/轴护套和泵体密封环,带电机安装式转速调节系统。带能效等级为 IE4/IE5(依据 IEC TS 60034-30-2:2016 标准)的无磁体同步磁阻电机 KSB SuPremE(例外:尺寸为 0.55 kW/0.75 kW、转速为 1500 rpm 的泵带有永磁体),配合无转子位置编码器的 KSB PumpDrive 2 或 KSB PumpDrive 2 Eco 转速调节系统运行。固定点符合 EN 50347 标准,外壳尺寸符合 DIN V 42673 (07-2011) 标准。可选购 ATEX 型式。
PumpDrive 2/PumpDrive 2 Eco
自冷式变频器,模块化构造,可通过模拟标准信号、现场总线或者操作单元无级改变异步和同步磁阻电机的转速。由于配有 PumpDrive 自冷装置,因此可安装在电机上、墙壁上以及开关柜中。无需辅助控制器即可控制最多 6 个泵。