Country and language selection

International websites

Europe

Americas / Oceania

Africa and Middle East

Asia / Pacific

Palazzo Grassi – where culture meets sustainability

An old building kitted out with modern technology: KSB pumps and valves for heating, air-conditioning, water and sanitation systems help to save 30 % of energy in the Palazzo Grassi.

Palazzo Grassi

The project: Palazzo Grassi, an 18th century Venetian palace

The Palazzo Grassi is one of Venice’s most famous buildings. The three-storey structure from the 18th century stands directly on the Canal Grande. It was created by architect Giorgio Massari in the transitional style between Late Baroque and Classicism. He was commissioned by the Grassi family.

Today, the impressive building houses a renowned museum of contemporary art. The exhibits belong to the French entrepreneur and collector François-Henri Pinault who bought the building in 2006.

An energy analysis revealed that the palace’s energy consumption was enormous, making energy optimisation measures absolutely necessary. The task was to install state-of-the art equipment for heating, air-conditioning, water and sanitation systems. Technology designed to meet the demands of maximum energy efficiency and environmental friendliness.


The challenge: Cutting-edge technology in an old building

The challenge was to significantly reduce energy consumption in the Palazzo Grassi – and thus save costs – by using efficient and environmentally friendly pumps and valves.


The solution: A complete range of technology and expertise covering all systems

To meet the specific requirements of the Palazzo Grassi, KSB supplied a complete range of pumps and valves for heating, air-conditioning, water and sanitation systems. This comprised 131 shut-off and control valves, 24 swing check valves, 29 strainers, 45 expansion joints and 5 Etabloc pumps.

The main criterion was the high efficiency of the pumps driven by KSB SuPremE IE5* motors. The magnet-less pump drive impresses with high efficiency in all load ranges, enabling maximum energy savings.

All pumps were also fitted with a PumpDrive variable speed system and PumpMeter pump monitoring unit. In addition to installing these new pumps, KSB carried out maintenance of some of the older pumps.

The project took eight months from its start in July 2015, with the products being delivered in November 2015 and final completion in February 2016.

The bottom line: KSB’s solution has enabled a substantial reduction (30 %) in energy consumption

30 % lower energy costs thanks to KSB solutions


Data I Facts I Figures

  • Location: Venedig
  • Application: Building Services
  • Project: Maintenance of older pumps, installation of KSB pumps and valves
  • Duration: July 2015 to February 2016 (8 months)
  • KSB Products used: Pumps and valves for heating, air-conditioning, water and sanitation systems✓ Energy-efficient & sustainable ✓ 30 % energy reductions
  • Commissioned: February 2016

Products used

Etabloc

Etabloc

单级蜗壳泵,性能符合 EN 733 标准,带可更换轴套和泵体密封环,带有电机安装式转速调节系统。带能效等级为 IE4/IE5(依据 IEC TS 60034-30-2:2016 标准)的无磁体同步磁阻电机 KSB SuPremE,配合无转子位置编码器的 KSB PumpDrive 2 或 KSB PumpDrive 2 Eco 转速调节系统运行。固定点符合 EN 50347 标准,外壳尺寸符合 DIN V 42673 (07-2011) 标准。可选购 ATEX 型式。

PumpDrive R (KSB202)

PumpDrive R (KSB202)

用于墙壁安装或者开关柜安装的变频器。用于调节转速或者控制异步电机、同步磁阻电机,例如 KSB SuPremE 或者永磁同步电机。通过使用 PumpDrive R,KSB PumpDrive 的功率范围可提高到 110 kW 的额定功率(标准)或者最高 1.4 MW 的额定功率(根据要求)。

BOA-Compact

BOA-Compact

截止阀符合 DIN/EN 标准,带法兰,短长度结构符合 EN 558/14 标准,带直线式顶部的斜座设计,一体式壳体、EPDM 护套式节流锥体,软密封式通道密封和背面密封件,位置指示器,固定装置,行程限制器,露点隔热罩,免维护,可完全隔热。

即将到来的KSB活动

凯士比诚邀您参加第二十一届中国国际石油石化技术装备展览会

展会将于2021年6月8日至10日在北京.中国国际展览中心举行

EuroExpo

KSB – 全球领先的工业阀门和泵制造商之一

KSB 于 1871 年在德国弗兰肯塔尔成立,100 多年以来一直是居于领先地位的泵和工业阀门制造商。KSB 在世界各地共有 15,500 多名员工,并且拥有自己的销售公司、制造厂和服务企业,KSB为各种应用开发和生产量身定制的泵。

作为经验丰富的泵制造商,其产品的应用涵盖建筑技术、工业技术、输水、污水净化以及发电站的各个工序。凭借创新研发,KSB 有能力满足千差万别的客户要求。作为知名的泵制造商,KSB 拥有长年积累的经验和专有技术知识。

凯士比泵制造: 你工厂最好的方案
来自KSB的工业泵和阀门应用范围广泛,而且非常节能。产品采用最具创新性的技术以及经过多年试验和测试的系统,令人信服,其中包括Etanorm标准水泵。Etanorm是世界上最成功的标准水泵,在全球范围内销量超过150万台。提供KSB备件服务

KSB 的备件水力性能、材料技术和自动化是泵制造商 KSB 的技术强项,这也正是其高性能泵的成功秘笈。

从一开始就能提供有力的服务
由于拥有众多生产设备,泵制造商 KSB 可以确保贴近客户并提供一流的服务。拥有丰富经验的持证专家确保优异的质量。KSB 服务部门可承担现场调试、检查、保养和维护您的泵、阀门和整套设备的任务。KSB 同样能保证快速交付备件。因此您可以直接从泵制造商处获得最佳服务。