Plant for yarn production

Textile Industry

KSB products improve all processes in textile industry applications

In the textile industry, textile fibres are manufactured and processed using large quantities of water and energy. This demands innovative, efficient products – a perfect fit for KSB pumps.

   

An ambitious challenge: meeting requirements in the textile industry

While yarn production itself places relatively modest demands on pumps in the textile industry, they must meet far more exacting requirements in textile production’s final treatment processes. Here, bleaching agents, dyes and other fluids can cause unwanted damage, colour mixing and contamination in the system. The solids content of the fluid handled also increases over the course of the textile manufacturing process. 

This requires pumps which can withstand sometimes aggressive fluids and do not clog despite the adverse conditions. And pumps should also be energy-efficient, since textile processing requires large amounts of water and power.


KSB’s products offer advantages worth showing off

KSB pumps and valves support trouble-free, efficient fibre and yarn production, dyeing, bleaching and finishing for textile industry applications. In yarn production for example, the pumps are used in air treatment and air conditioning. For final treatment processes, KSB supplies robust stainless steel pumps and products that are easy to clean and thus prevent damage, paint mixing and contamination. This means that KSB pumps can ensure reliable and trouble-free system operation at all times – regardless of the fluid handled. 

And because energy consumption is such an important issue in textile production, KSB pumps are designed to help you operate your plant as energy-efficiently as possible.


KSB pumps for the textile industry outdo expectations

Pumps and valves from KSB are tailored to the special requirements of the textile and clothing industry in terms of their materials and design. The result: a long service life and low maintenance costs. 
In addition, KSB’s products can be equipped with specialised control systems which enhance their long-term operational efficiency and reliability. 
KSB’s star performer for textile production is the MegaCPK, a standardised chemical pump. It is regarded as the basis for numerous standards, and is particularly suitable for pumping aggressive fluids. The MegaCPK is also known for its energy efficiency and operating reliability in a wide range of variants.  
In addition, KSB has many years of experience and expertise in the field of textile processing and offers you not only innovative products, but also a comprehensive range of service solutions.


Our portfolio

KSB offers a wide range of products for the textile industry:

  • Standardised chemical pumps
  • Standardised/close-coupled pumps
  • High-pressure pumps
  • Process pumps
  • Stainless steel centrifugal pumps
  • Shut-off valves
  • Automation and drive systems
  • Variable speed systems

Typical applications include

  • Various processes in fibre and yarn production 
  • Special applications such as dyeing, bleaching and finishing 
  • Air treatment and air conditioning for yarn production
  • Waste water treatment

Your benefits

  • Unique portfolio of pumps, valves and automation systems 
  • The ideal product for every fluid to be handled
  • High-performance, energy-efficient and non-clogging pumps that can withstand even aggressive fluids  
  • Long-term energy savings thanks to specialised control systems
  • Long service lives and low maintenance costs due to tailored materials and design
  • 24-hour service from experienced technicians based in over 170 service centres worldwide 

Find suitable pumps for the textile industry

KSB offers a wide range of innovative products for textile production. Here you will find a selection:

MegaCPK

MegaCPK

Horizontal radially split volute casing pump in back pull-out design, with radial impeller, single-entry, single-stage, to DIN EN ISO 5199, dimensions to DIN EN ISO 2858, complemented by nominal diameters DN25 and ≥DN200, in large range of material and seal variants; also available as a variant with "wet" shaft and conical seal chamber. ATEX-compliant version available.

Movitec

Movitec

Multistage vertical high-pressure centrifugal pump in ring-section design with suction and discharge nozzles of identical nominal diameters arranged opposite to each other (in-line design), close-coupled. With KSB SuPremE, a magnetless synchronous reluctance motor (exception: motor sizes 0.55 kW / 0.75 kW with 1500 rpm are designed with permanent magnets) of efficiency class IE4/IE5 to IEC TS 60034-30-2:2016, for operation on a KSB PumpDrive 2 or KSB PumpDrive 2 Eco variable speed system without rotor position sensors. Motor mounting points in accordance with EN 50347, envelope dimensions in accordance with DIN V 42673 (07-2011). ATEX-compliant version available.

Multitec

Multitec

Multistage horizontal or vertical centrifugal pump in ring-section design, long-coupled or close-coupled, with axial or radial suction nozzle, cast radial impellers and motor-mounted variable speed system. ATEX-compliant version available.

Find suitable valves for the textile industry

KSB Newsletter

Don’t miss out the latest information on KSB pumps, valves and services and sign up today

  • Stay up to date with our E-Newsletter
  • Get valuable insights & exclusive promotions via E Mail
Newsletter
Illustration of the phases of a product life cycle: Consultation and analysis, commissioning, operation and repair

Service at KSB SupremeServ means being fully looked after

KSB SupremeServ offers you a comprehensive range of services and spare parts for pumps, valves and other equipment – including for products from other manufacturers – from face-to-face consultation to installation, commissioning, maintenance and repair. More than 3500 specialists in over 190 service centres worldwide are available around the clock, seven days a week. Concentrate on your core business – and let us take care of the rest.

Technical consultancy for pumps and valves

Technical Consultancy

As a full-range supplier, KSB is on hand to advise you in every stage of the life cycle of your product or system.

  • Cost savings via system optimisation
  • Increasing system availability
Inspection service

Inspection service

KSB’s inspection service provides regular pump inspection and pump maintenance to ensure the reliable operation and increased availability of your system.

  • Preventing failures
  • 24-hour on-call service
Reverse Engineering for pumps and valves

Reverse Engineering

Reverse engineering makes it possible to quickly manufacture spare parts for pumps, valves and other rotating equipment that are hard to find or no longer available.

  • Optimisation thanks to engineering services
  • Quick reproduction of spare parts