Loading...
Shopping Cart
KSB well pumps in use for irrigation
4 min read

Working underground with sky-high efficiency: Well pumps from KSB

“One man's pleasure is another man’s pain” – this also applies to the weather. While some of us are basking in the sun, others, such as farmers, are looking at the sky with concern, hoping for rain. As a matter of fact, the past two decades have seen the ten hottest years since weather started to be recorded worldwide 150 years ago. 2023, too, is predicted to be dry as a bone. But how will potatoes, wheat and corn obtain the vital liquid, if it is not coming from above?

“One man's pleasure is another man’s pain” – this also applies to the weather. While some of us are basking in the sun, others, such as farmers, are looking at the sky with concern, hoping for rain. As a matter of fact, the past two decades have seen the ten hottest years since weather started to be recorded worldwide 150 years ago. 2023, too, is predicted to be dry as a bone. But how will potatoes, wheat and corn obtain the vital liquid, if it is not coming from above?

The answer is: from below or to be more specific: from wells leading to the groundwater. In such deep sumps special well pumps are working tirelessly. They tap into the groundwater and pump it to the surface, where it is used for irrigating fields, for example. With increasing aridity and population growth this type of water extraction is clearly continuing to gain in significance. KSB as one of the leading manufacturers of powerful well pumps, efficient motors and matching valves, is a reliable expert in this field, positioned on safe terrain worldwide.

KSB has been deeply rooted in water engineering for many years.

Well pumps for water extraction have to be specially designed to provide many years of service underground. The wells are often only a few inches wide, which is why mainly submersible borehole pumps are used. They have a slim build and a (often multistage) hydraulic system coupled with a wet submersible motor. The complete pump set can be submerged in the groundwater.
This poses particular challenges: Once the pumps have been lowered into the well, they are difficult to access from the outside for any servicing or inspection work. Next to their efficiency, key features of well pumps are being maintenance-free, durable and corrosion-resistant.
KSB meets these challenges with uncompromising strength: The pumps are manufactured in different material variants depending on the application they will be used for; each pump can be individually adjusted to the specific requirements at the site. This is how KSB produces pumps with an outstanding service life, excellent efficiencies and, with that, low energy and life cycle costs.

The youngest in KSB’s well pump family: 

With UPA S 200 KSB has extended its submersible borehole pump portfolio by a highly efficient 8-inch model. It is suitable for use in water extraction, irrigation, groundwater management and pressure boosting. The 8-inch pump will initially be launched on the market in four different hydraulic system sizes. Its optimum flow rates range between 40 and 160 cubic metres per hour; its maximum head is 400 metres.
UPA S 200 is an all-round high performer: For the highest of efficiencies all its cast components are made of high-quality investment cast stainless steel. Its wear-resistant design with metal casing wear rings and bearings made of silicon carbide keep energy consumption down for many years, even if large amounts of sand are contained in the water.
Thriftiness is another one of its virtues. The optimized hydraulic system achieves high efficiency levels. Combining the pump with the high-efficiency UMA-S synchronous motor and a variable speed system further lowers the energy costs considerably. For fixed speed operation, the impeller diameter is trimmed with millimetric precision to adjust characteristic curves individually to the demand and prevent excessive energy consumption.
Would you like to find out more about the new UPA S 200? Feel free to contact us any time.
The new high-efficiency UPA S 200 8-inch stainless steel well pump

UPA well pumps

Used products

UPA C 150

UPA C 150
Documents

All-stainless steel single-stage or multistage centrifugal pump in ring-section design, suitable for vertical or horizontal installation, for well diameters of 150 mm (6 inches) and above.

Details

UPA 200 / UPA S 200

UPA 200 / UPA S 200
Documents

Single-stage or multistage single-entry centrifugal pump in ring-section design for vertical or horizontal installation. Optionally available with lift check valve or connection branch. For well diameters of 8 inches and above.

Details

UPA 250 / UPA S 250

UPA 250 / UPA S 250
Documents

Single-stage or multistage single-entry centrifugal pump in ring-section design for vertical or horizontal installation. Mixed flow hydraulic systems with impellers that can be turned down. Optionally available with lift check valve or connection branch. For well diameters of 10 inches and above.

Details

UPA 300 / UPA S 300

UPA 300 / UPA S 300
Documents

Single-stage or multistage single-entry centrifugal pump in ring-section design for vertical or horizontal installation. Mixed flow hydraulic systems with trimmable impellers. Optionally available with lift check valve or connection branch. For well diameters of 12 inches and above.

Details

UPA C 100

UPA C 100
Documents

Multistage centrifugal pump in ring-section design made of stainless steel for well diameters of 100 mm (4 inches) and above, available with single-phase AC motor or three-phase motor with motor lead.

Details

UPA C 150

UPA C 150
Documents

All-stainless steel single-stage or multistage centrifugal pump in ring-section design, suitable for vertical or horizontal installation, for well diameters of 150 mm (6 inches) and above.

Details

UPA 200 / UPA S 200

UPA 200 / UPA S 200
Documents

Single-stage or multistage single-entry centrifugal pump in ring-section design for vertical or horizontal installation. Optionally available with lift check valve or connection branch. For well diameters of 8 inches and above.

Details

UPA 350 / UPA S 350

UPA 350 / UPA S 350
Documents

Single-stage or multistage single-entry centrifugal pump in ring-section design for vertical or horizontal installation. Mixed flow hydraulic systems with impellers that can be turned down. Optionally available with lift check valve or connection branch. For well diameters of 14 inches and above.

Details