Košarica

Country and language selection

International websites

ksb.com (English) ksb.com (Deutsch)

Europe

Americas / Oceania

Africa and Middle East

Asia / Pacific

KSB equips the largest waste water treatment plant in Asia with waste water pumps

The Bailonggang waste water treatment plant in Shanghai is the largest waste water treatment plant in Asia and one of the biggest in the world. It disposes of the waste water produced by around 3.6 million people.

Shanghai

The project: Shanghai’s waste water treatment 

The project saw the construction of one of the world’s largest waste water treatment plants in Bailonggang, in direct proximity to Shanghai, a metropolis with a population in the double-digit millions in Eastern China. The aim was for the plant to clean one third of all the waste water from a catchment area of over 270 km² – more than two million cubic metres every day.

The challenge: One of the largest waste water treatment plants in Asia

What was special about this task was the sheer scale coupled with the high output requirements placed on the waste water equipment. For the construction of the waste water treatment plant, hundreds of waste water pumps were needed. The operating company opted for KSB as the supplier because KSB pumps fulfilled all of the performance parameters specified without exception. In particular the higher levels of hydraulic efficiency compared to many competitor products are today making a major contribution to the energy efficiency of the entire waste water treatment plant.

The solution: Over 300 submersible pumps including all components

KSB supplied a total of 241 submersible waste water pumps from the Amacan range, 65 submersible motor pumps from the Amarex KRT and Amarex N ranges, six dry-installed SPN waste water pumps and six dry-installed ZL axial flow pumps. The pumps were supplied with all requisite components ready for connection, some already with the necessary control cabinets.
Today, the Bailonggang waste water treatment plant in Shanghai is the largest waste water treatment plant in Asia and one of the biggest in the world. One third of all the waste water produced by the city with a population in the double-digit millions is cleaned here. Every day, over two million cubic metres of waste water pass through the waste water treatment plant.

Data I Facts I Figures

  • Location: Shanghai, China
  • Project: 

    241 Amacan submersible motor pumps
    65 submersible motor pumps from the Amarex KRT and Amarex N ranges
    6 dry-installed SPN waste water pumps
    6 dry-installed ZL axial flow pumps

Products used

KSB – eden vodilnih proizvajalcev industrijskih armatur in črpalk na svetu

Podjetje KSB je bilo leta 1871 ustanovljeno v Frankenthalu (Nemčija) in že več kot 100 let spada med vodilne proizvajalce črpalk in industrijskih armatur. Z več kot 15.500 zaposlenimi po vsem svetu in lastnimi prodajnimi podjetji, proizvodnimi delavnicami ter servisnimi obrati podjetje KSB razvija in izdeluje po meri prilagojene črpalke za najrazličnejše uporabe.

Paleta izdelkov izkušenega proizvajalca črpalk se uporablja na področjih stavbne in industrijske tehnike, transporta vode in čiščenja odpadnih voda ter v tehničnih postopkih elektrarn. Zahvaljujoč inovativnim raziskavam in razvoju lahko podjetje KSB izpolnjuje najrazličnejše zahteve strank. Kot priznani proizvajalec črpalk podjetje KSB poseduje dolgoletne izkušnje in tehnično znanje.

Proizvajalec črpalk KSB: najboljša rešitev za vašo napravo
Industrijske črpalke in industrijske armature podjetja KSB so primerne za širok spekter uporabe in so izjemno energetsko učinkovite. Izdelki prepričajo z najbolj inovativno tehniko in se že vrsto let uspešno uporabljajo v napravah – med drugim tudi standardna vodna črpalka Etanorm. Z več kot 1,5 milijona prodanimi agregati spada Etanorm med najuspešnejše standardne vodne črpalke na svetu. Nadomestni deli in servisne storitve podjetja KSB skrbijo za delovno varnost industrijskih črpalk in industrijskih armatur KSB. Hidravlika, tehnika materiala in avtomatizacija so tehnološke prednosti proizvajalca črpalk KSB in ravno v tem se skriva recept za uspeh njihovih visokozmogljivih črpalk.

Strokoven servis od samega začetka
Zahvaljujoč proizvodnim delavnicam lahko proizvajalec črpalk KSB zagotovi prvovrsten servis, prilagojen stranki. Certificirani strokovnjaki z obsežnimi izkušnjami skrbijo za izjemno kakovost. Servisna služba podjetja KSB prevzame zagon, pregled, vzdrževanje in servisiranje vaših črpalk, armatur in celotne naprave neposredno na vaši lokaciji. Podjetje KSB poskrbi tudi za hitro dostavo nadomestnih delov. Na ta način prejmete najboljši servis neposredno od vašega proizvajalca črpalk.