5A Mechanical seal according to DIN EN 12756

Mechanical seal according to DIN EN 12756 5A

For all pump type series with a standardised seal installation space to DIN EN 12756 Single, unbalanced component seal, dynamic design. The seal is easy to install and designed for universal use.
예비 부품
모든 문서와 다운로드 보기

기술 데이터

Cartridge seal
No
Design Mechanical seal
Dynamic
Mechanical seal type
Unbalanced mechanical seal
Sealing type Mechanical seal
Single
Max allowed fluid temp TSG
220 °C

KSB 연락처: 항상 고객을 지원합니다.

올바른 제품 번호를 찾는 데 도움이 필요하십니까?
직접 주문이 가능하도록 빠른 시일 내에 컨텐츠를 제공할 예정입니다.
그동안 저희 지원팀에 문의해 주시기 바랍니다.

Your KSB contact : We’re here to support you

혜택

  • The single unbalanced seal features a circlip which holds together the dynamic unit. This makes installation so much easier compared with similar competitor seals.
  • Also for use with a quench system and as a double mechanical seal in back-to-back or tandem arrangement
  • The seal is designed for universal use and fits perfectly into standardised installation spaces, e.g. of Multitec, MegaCPK and Etanorm pumps.

기술 데이터

Max allowable axial movem TSG
3 mm
Min allowable axial movem TSG
-3 mm
Cartridge seal
No
Max allow.dynamic pressure TSG
25 bar
Design Mechanical seal
Dynamic
Mechanical seal type
Unbalanced mechanical seal
Sealing type Mechanical seal
Single
Mtrl metallic compon.mech.seal
1.4501,
1.4571,
2.4610
Mtrl mech.seal spring
1.4571,
2.4610
Mtrl Secondary seal inboard
FKM,
EPDM,
FFKM
Mtrl Mating ring inboard
Q1 [SIC, DRUCKLOS GESINTERT],
U2 [TUNGSTEN CARBIDE, NI-BINDER],
Q7 [SIC,POROUS,SINTERED PRESSURELESS,NO GRAPHIT]
Mtrl Primary ring inboard
A [CARBON, METAL-IMPREGNATED],
B [CARBON, RESIN-IMPREGNATED],
Q1 [SIC, DRUCKLOS GESINTERT],
U2 [TUNGSTEN CARBIDE, NI-BINDER],
Q7 [SIC,POROUS,SINTERED PRESSURELESS,NO GRAPHIT]
Dir of rotation Mech seal
Bi-directional
Max allow.sliding speed TSG
20 m/s
Spring design Mechanical seal
Multiple springs
Max allow.static pressure TSG
37.5 bar
Max allowed fluid temp TSG
220 °C
Min allowed fluid temp TSG
-50 °C

단면도

;