Country, region and language selection

International websites

ksb.comENDE

Europe

Americas / Oceania

Africa and Middle East

Asia / Pacific

Etanorm SYT Dry-installed pump

Dry-installed pump Etanorm SYT

Horizontal volute casing pump in back pull-out design, single-stage, with ratings and dimensions to EN 733, radially split volute casing with integrally cast pump feet, replaceable casing wear rings, closed radial impeller with multiply curved vanes, single mechanical seal to EN 12756, double mechanical seal to EN 12756, drive-end bearings: rolling element bearings, pump-end bearings: plain bearings, with magnetless KSB SuPremE motor (exception: motor sizes 0.55 kW / 0.75 kW with 1500 rpm are designed with permanent magnets) of efficiency class IE4/IE5 and PumpDrive variable speed system; ATEX-compliant version available.
모든 문서와 다운로드 보기

주 사용 용도

  • Heat transfer systems
  • Hot water circulation

기술 데이터

Maximum flow rate TSG
754 m3/h
Maximum head TSG
102 m
Max allow ds work.pressure TSG
16 bar
Max allowed fluid temp TSG
350 °C

KSB 연락처: 항상 고객을 지원합니다.

올바른 제품 번호를 찾는 데 도움이 필요하십니까?
직접 주문이 가능하도록 빠른 시일 내에 컨텐츠를 제공할 예정입니다.
그동안 저희 지원팀에 문의해 주시기 바랍니다.

Your local contact
Your KSB contact : We’re here to support you

혜택

  • Designed to deliver reliable operation with mineral and synthetic thermal oils up to 350 °C
  • Maximum operating reliability ensured by KSB single mechanical seal and KSB double multi-spring mechanical seals in tandem arrangement as well as quench systems tailored to any application
  • Safety barriers: Optimised contour ensures reliable removal of leakage at the mechanical seal; additional shaft seal ring, durable grease-packed bearings, confined sealing elements and effective heat barrier

기술 데이터

Component function
Pump
Connection type Inlet
Flange
Drive concept
With electric actuator
Maximum flow rate TSG
754 m3/h
Minimum flow rate TSG
1.5 m3/h
Maximum head TSG
102 m
Minimum head TSG
2 m
Mains frequency
50 Hz,
60 Hz
Mains voltage
400 V,
460 V
Mtrl Hydraulic casing
EN-GJS-400-15/A536 GRADE 60-40-18
Nominal pressure Outlet
PN 16
Max allow ds work.pressure TSG
16 bar
Suction behaviour
Non-self-priming
Max allowed fluid temp TSG
350 °C
Min allowed fluid temp TSG
-30 °C

단면도

다운로드