Etanorm Dry-installed pump

Dry-installed pump Etanorm

Horizontal volute casing pump, single-stage, with ratings and main dimensions to EN 733, long-coupled, back pull-out design, with replaceable shaft sleeves / shaft protecting sleeves and casing wear rings, with motor-mounted variable speed system. With KSB SuPremE, a magnetless synchronous reluctance motor (exception: motor sizes 0.55 kW / 0.75 kW with 1500 rpm are designed with permanent magnets) of efficiency class IE4/IE5 to IEC TS 60034-30-2:2016, for operation on a KSB PumpDrive 2 or KSB PumpDrive 2 Eco variable speed system without rotor position sensors. Motor mounting points in accordance with EN 50347, envelope dimensions in accordance with DIN V 42673 (07-2011). ATEX-compliant version available.
예비 부품
모든 문서와 다운로드 보기

주 사용 용도

  • Handling clean or aggressive fluids not chemically and mechanically aggressive to the pump materials.
  • Water supply systems
  • Cooling circuits
  • Swimming pools

기술 데이터

Maximum flow rate TSG
1368 m3/h
Maximum head TSG
160 m
Max allow ds work.pressure TSG
16 bar
Max allowed fluid temp TSG
140 °C

KSB 연락처: 항상 고객을 지원합니다.

올바른 제품 번호를 찾는 데 도움이 필요하십니까?
직접 주문이 가능하도록 빠른 시일 내에 컨텐츠를 제공할 예정입니다.
그동안 저희 지원팀에 문의해 주시기 바랍니다.

Your local contact
Your KSB contact : We’re here to support you

혜택

  • Improved efficiency and NPSHreq by experimentally verified hydraulic design of impellers (vanes)
  • Operating costs reduced by trimming the nominal impeller diameter to match the specified duty point
  • Little wear, low vibration levels and excellent smooth running characteristics thanks to good suction performance and virtually cavitation-free operation across a wide operating range

기술 데이터

Component function
Pump
Connection type Inlet
Flange
Drive concept
With electric actuator,
Combustion engine
Maximum flow rate TSG
1368 m3/h
Minimum flow rate TSG
1.5 m3/h
Maximum head TSG
160 m
Minimum head TSG
2 m
Mains frequency
50 Hz,
60 Hz
Mains voltage
400 V,
460 V,
220 V,
230 V,
240 V,
380 V,
415 V,
500 V,
575 V,
660 V,
690 V
Mtrl Hydraulic casing
EN-GJL-250/A48 CL 35B,
CC480K-GS/B30 C90700,
1.4408/A743 GR CF8M,
EN-GJS-400-15/A536 GR 60-40-18
Nominal pressure Outlet
PN 16,
PN 10,
CL 150,
CL 125
Max allow ds work.pressure TSG
16 bar
Suction behaviour
Non-self-priming
Max allowed fluid temp TSG
140 °C
Min allowed fluid temp TSG
-30 °C

단면도

다운로드

문서

KSB PART Community에서 CAD 파일 다운로드
;