Etaline Z Dry-installed pump
Dry-installed pump

Etaline Z

Single-stage volute casing pump in in-line design as twin pump, with magnetless KSB SuPremE motor of efficiency class IE4/IE5 and PumpDrive variable speed system; pump shaft and motor shaft are rigidly connected. An M12 module (accessory) enables redundant operation of Etaline Z without the need for a higher-level controller. With KSB SuPremE, a magnetless synchronous reluctance motor of efficiency class IE4/IE5 to IEC TS 60034-30-2: 2016, for operation with the KSB PumpDrive 2 or KSB PumpDrive 2 Eco variable speed system without rotor position sensors. Motor mounting points in accordance with EN 50347, envelope dimensions in accordance with DIN V 42673 (07-2011). ATEX-compliant version available.
Voir tous les documents et téléchargements

Applications principales

  • Service water supply systems
  • Heating systems
  • Industrial recirculation systems
  • Air-conditioning systems
Afficher toutes les applicationsicon arrowright

Caractéristiques techniques

  • Max. flow rate1095 m³/h
  • Max. head38 m
  • Max. allowed working pressure16 bar
  • Max. allowed fluid temperature140 °C


  • E13B_4538540683-1_1
    This product is subject to the provisions of the "Ecodesign" Directive 2009/125/EC and meets, as a minimum, the ecodesign requirements established in 2015 for water pumps with a maximum nominal shaft power of 150 kW as per Regulation (EU) No. 547/2012.

Courbes caractéristiques

Liste des n° articles – Etaline Z

353 produits
NomPoidsN° articlePrix
ETLZ032-032-160 GGSAV11D200024 B62,7 Kilogram48228931
ETLZ032-032-160 GGSAV11D200034 B65,1 Kilogram48228932
ETLZ032-032-160 GGSAV11D200054 B71,9 Kilogram48228933
ETLZ032-032-160 GGSAV11D200054 BPD2E81,9 Kilogram48237696
ETLZ032-032-160 GGSAV11D200054 BPD2EM81,9 Kilogram48237695


TitreFormatTailleDernière modification
icon download-pdfEtaline Z with speed control (1161.4_FR)pdf3.3424/05/2019
TitreFormatTailleDernière modification
TitreFormatTailleDernière modification
icon download-pdfEtaline Z (1161.8_FR)pdf5.324/05/2019
icon download-pdfPumpDrive 2 Eco (4074.82_FR)pdf25.330/09/2020
icon download-pdfPumpDrive 2 (4074.81_FR)pdf28.4901/10/2020

Caractéristiques techniques

  • FunctionPump
  • Connection typeFlange
  • Drive conceptWith electric actuator
  • Max. flow rate1095 m³/h
  • Min. flow rate1 m³/h
  • Max. head38 m
  • Min. head1 m
  • Mains frequency50 Hz
  • Mains voltage400 V
  • Nominal pressurePN 16
  • Max. allowed working pressure16 bar
  • Suction behaviourNon-self-priming
  • Max. allowed fluid temperature140 °C
  • Min. allowed fluid temperature-30 °C

Plans en coupe