Amacan P Submersible pump in discharge tube
Submersible pump in discharge tube

Amacan P

Wet-installed submersible motor pump for installation in discharge tubes, with axial propeller in ECB design, single-stage, single-entry. ATEX-compliant version available.
See all documents and downloads

Main Applications

  • Irrigation pumping stations
  • Drainage pumping stations
  • Stormwater pumping stations
  • Raw water pumps and clean water pumps in waterworks and waste water treatment plants
Show all applicationsicon arrowright

Technical Data

  • Max. flow rate25200 m³/h
  • Max. head12 m
  • Max. allowed working pressure16 bar
  • Max. allowed fluid temperature40 °C

Benefits

  • The pump’s own weight ensures self-centring seating in the discharge tube, and an O-ring seals it; quick to install or remove.
  • The slim motor minimises discharge tube flow losses.
  • High reliability thanks to bearing temperature monitoring, vibration sensor, thermal motor protection, leakage sensors in the motor space and connection space as well as leakage monitoring of the mechanical seal system.

Characteristic curves

Your KSB contact: We're here to support you

Do you need any assistance finding the right material number?
We’ll soon provide a list so you can directly place your purchase order.
Meanwhile please contact our support:

Tel: +44 1509 231872


Your KSB contact : We’re here to support you

Documents

TitleFormatSizeLast change
icon download-pdfAmacan P; 60 Hzpdf5.335/21/2020
icon download-pdfAmacan P; 50 Hzpdf2.775/24/2019
TitleFormatSizeLast change
icon download-pdfAmacan P; 50 Hzpdf3.335/24/2019
icon download-pdfAmacan P; 60 Hzpdf3.145/24/2019
TitleFormatSizeLast change
icon download-pdfAmacan Ppdf0.095/24/2019

Technical Data

  • FunctionPump
  • Drive conceptWith electric actuator
  • Max. flow rate25200 m³/h
  • Min. flow rate0.1 m³/h
  • Max. head12 m
  • Min. head0.1 m
  • Mains frequency50 Hz, 60 Hz
  • Mains voltage380 V, 400 V, 460 V
  • Casing material1803
  • Nominal pressurePN 16
  • Max. allowed working pressure16 bar
  • Suction behaviourNon-self-priming
  • Max. allowed fluid temperature40 °C
  • Min. allowed fluid temperature2 °C

Sectional Drawings