UPA 200;UPA S 200 Submersible borehole pump
Submersible borehole pump

UPA 200;UPA S 200

Single-stage or multistage single-entry centrifugal pump in ring-section design for vertical or horizontal installation. Optionally available with lift check valve or connection branch. For well diameters of 8 inches and above.
See all documents and downloads

Main Applications

  • Water supply systems
  • Spray irrigation systems
  • Mining
  • General irrigation systems
Show all applicationsicon arrowright

Technical Data

  • Max. flow rate150 m³/h
  • Max. head300 m
  • Max. allowed working pressure40 bar
  • Max. allowed fluid temperature50 °C

Benefits

  • High efficiencies through optimised hydraulic design
  • High operating reliability and a long service life by integrated sand separator, robust wear rings and enclosed pump bearings
  • Reliable operation by anti-jam lift check valve

Your KSB contact: We're here to support you

Do you need any assistance finding the right material number?
We’ll soon provide a list so you can directly place your purchase order.
Meanwhile please contact our support:

Tel: +41 43 210 99 33


Your KSB contact : We’re here to support you

Documents

TitleFormatSizeLast change
icon download-pdfBrochure Petrochemical Industrypdf1.33/27/2020
TitleFormatSizeLast change
icon download-pdfPump units with motors < 1kVpdf12.125/24/2019
TitleFormatSizeLast change
icon download-pdfUPA; 50 Hzpdf31.984/21/2020
icon download-pdfUPA S 200pdf3.733/28/2020
icon download-pdfUMA; 50 Hz / 60 Hzpdf4.674/10/2020
icon download-pdfUMA-Spdf4.394/10/2020
icon download-pdfDN 100pdf1.925/15/2020

Technical Data

  • FunctionPump
  • Connection typeInternal-thread connection, Flange
  • Drive conceptWith electric actuator
  • Max. flow rate150 m³/h
  • Min. flow rate24 m³/h
  • Max. head300 m
  • Min. head12 m
  • Mains frequency50 Hz, 60 Hz
  • Mains voltage230 V, 380 V, 400 V, 415 V, 460 V, 500 V, 690 V, 1000 V
  • Casing material1312, 3519, 7563
  • Nominal pressurePN 40
  • Max. allowed working pressure40 bar
  • Suction behaviourNon-self-priming
  • Max. allowed fluid temperature50 °C
  • Min. allowed fluid temperature0 °C