Downstream Hydrocarbon Processing
KSB pumps keep complex downstream systems in motion, delivering high-value products for industry and everyday life.
As refineries transform crude oil into products that fuel our economy, heat homes and factories, and fertilise soil, they rely on heavy-duty KSB pumps to circulate challenging fluids.
Move hot hydrocarbon streams safely and efficiently
KSB process pumps enable swift and reliable downstream operations
- Find the model for your downstream needs: Our rugged RPH, RPHb/d and RPH-V process pumps or multi-stage CHTR barrel-type pumps, as well as our vertical WKTR/WKB pumps are engineered for the high-pressure, heavy-duty operations of the downstream oil and gas industry.
- Likewise, you can count on utility pumps from our KWP, Omega, RDLO and other series for applications such as producing steam and circulating hot oils throughout the labyrinth of close-fitting piping systems found in refineries.
Your benefits: Powerful pumps meet comprehensive service for downstream oil and gas
RPH
Horizontal radially split volute casing pump in back pull-out design, to API 610, ISO 13709 (heavy duty), type OH2, single-stage, with single-suction radial impeller and centreline pump feet; with inducer if required. ATEX-compliant version available.
RPHb/RPHd/RPHbd
Heavy-duty horizontal radially split between-bearings volute casing pump to API 610, ISO 13709 (heavy duty), type BB2, with radial impellers, single- or double-entry, single- or two-stage design with centreline pump feet. ATEX-compliant version available.
CHTR
Horizontal radially split multistage high-pressure pumps in between-bearings design, with double casing (barrel-type pumps) to API 610 (ISO 13709), type BB5. First stage optionally available in double-suction design for low NPSH requirements. ATEX-compliant version available.
RPH-V
Vertical single-stage sump pump to API 610 and ISO 13709 (heavy duty), type VS4, with integral thrust bearing assembly and separate discharge line. ATEX-compliant version available.
WKTR
Vertically suspended, double-casing, lineshaft, diffuser-type pump with integral thrust bearings and discharge through column pipe in accordance with API 610 / ISO 13709 (VS6). Available in single-stage or multistage configurations and with single suction first-stage impeller.
MIL 41000
Cage-guided single-ported heavy-duty control valves, high pressure drop capability; noise reduction and anti-cavitation solution available by replacing the standard cage.
MIL 10000
The top- and bottom-guided double-ported control valve is characterised by a high permissible pressure drop across the valve. The high flow capacity typical of this design is attained with low pressure recovery. Bi-directional flow is permitted; wide flow passage, suitable for viscous fluids.
SICCA 900-3600 GTC
Gate valve to ANSI/ASME with butt weld ends, pressure seal design, split wedge, outside screw and yoke, rising stem and non-rising handwheel, Stellite hard-faced seat/disc interface and back seat, with graphite gasket and gland packing. Available in carbon steel and alloy steel.
