Country and language selection

International websites

Europe

Americas / Oceania

Africa and Middle East

Asia / Pacific

Consumer Chemicals Production

KSB pumps ensure trouble-free performance – for safe, flexible and cost-effective processes.

The production of household or personal care chemicals must be hygienic, effective and easy on the environment. We help you meet all the applicable standards, so you can focus on satisfying and exceeding your targets. 

Large equipment and overhead piping inside a consumer chemicals factory

Choose the right chemical pump solutions for more peace of mind

Whether you specialise in personal care products, household chemicals or insecticides, absolute reliability is essential. After all, your batch production or bulk production cycles must meet stringent health and environmental standards, 24/7. Count on us: We have the expertise, products and services to help you meet and maintain your targets.

KSB pumps: fully tailored to your consumer chemicals processes 

In bulk production, equipment uptime determines overall profitability. When it comes to batch production, flexibility is key. In any case, you need dependable fluid-handling equipment that will keep processes flowing and secure. For these reasons, manufacturers of both commodity and speciality chemicals choose KSB.

Find the perfect one for you: Our broad consumer chemical portfolio includes corrosion-resistant, standardised chemical pumps and process pumps, seal-less pumps, and much more.

  • MegaCPK is top of its class: the best standardised pump in the chemical industry. Optimised hydraulic components set new standards in energy efficiency, while low NPSH ensures quiet and smooth operation.
  • Our Magnochem magnetic drive pump series, with many available variants, also meets your strictest customer requirements.
  • The CPKN is ideal for pumping aggressive organic and inorganic fluids in chemical process engineering.
  • And our Estigia vertical immersion pump is available in an ATEX-compliant version.

Reliably handling everything from hot acids to solids-laden lyes, KSB pumps are your partners for safety and reliability – in terms of both process and product.

How KSB supports consumer chemical production

We know how high your standards are. KSB’s advanced fluid-handling technologies ensure that aggressive, corrosive and explosive fluids are transported and contained safely. Our expertly engineered pumps offer trouble-free, efficient operation along with a high degree of flexibility and low life cycle costs.

But we deliver more than robust, reliable products – we support you in developing custom processes. We also invite you to benefit from our specialist services: installation, commissioning, inspection and maintenance. If any repair needs arise, we’ll come to you.

Again and again, manufacturers of consumer chemicals turn to KSB. With good reason: They trust our application expertise in safe continuous production and hygienic batch processes.

Our portfolio

KSB offers a wide range to support your production of consumer chemicals:

  • Standardised chemical pumps and process pumps
  • Seal-less pumps
  • Pumps for solids-laden fluids
  • High-pressure pumps
  • Mechanical seals and seal flush plans
  • Drives and variable speed systems
  • Shut-off valves
  • Control valves
  • Safety valves

Applications include

  • Chloride-containing fluids, reducing acids and acidic process water
  • Solids-laden acids and lyes
  • Aggressive fluids in chemical process engineering
  • Highly oxidising acids such as nitric, chromic or sulphuric acids
  • Hot, concentrated acids and highly-concentrated alkaline solutions/lyes

Your benefits

  • Flexible and application-specific solutions thanks to a broad product portfolio
  • Reliable pumping and containment of the most demanding fluids – in compliance with the highest safety standards
  • Solutions for extreme conditions by employing wear- and corrosion-resistant construction materials
  • Reduced total cost of ownership through innovative technology
  • Energy-efficient operation with optimised hydraulics and smart drive solutions
  • Comprehensive service – from installation and commissioning to inspection, maintenance and on-site repair

MegaCPK

MegaCPK

Horizontal radially split volute casing pump in back pull-out design, with radial impeller, single-entry, single-stage, to DIN EN ISO 2858 / ISO 5199; also available as a variant with "wet" shaft and conical seal chamber. With KSB SuPremE, a magnetless synchronous reluctance motor of efficiency class IE4/IE5 to IEC TS 60034-30-2:2016, for operation with the KSB PumpDrive 2 or KSB PumpDrive 2 Eco variable speed system without rotor position sensors. Motor mounting points in accordance with EN 50347, envelope dimensions in accordance with DIN V 42673 (07-2011). ATEX-compliant version available.

Magnochem

Magnochem

Horizontal seal-less volute casing pump in back pull-out design, with magnetic drive, to DIN EN ISO 2858 / ISO 5199, with radial impeller, single-entry, single-stage. ATEX-compliant version available.

Estigia

Estigia

Vertical immersion pump for wet installation with closed impeller, to DIN EN ISO 5199 (with comments). Supplied with discharge pipe extending above the cover plate, DN according to nominal flow rate. Sealing by lip seal, single or double cartridge mechanical seal. ATEX-compliant version available.

Find suitable valves for consumer chemical production now

KE

KE

Centred-disc butterfly valve with PFA liner for the chemical industry. With lever, manual gearbox, pneumatic or electric actuator. With wafer-type body (T1), full-lug body (T4) or U-section body with raised faces (T6). EN, ASME, JIS connections possible.

ISORIA 10/16

ISORIA 10/16

Centred-disc butterfly valve, sealed by elastomer liner, with lever or manual gearbox, pneumatic, electric or hydraulic actuator. Wafer-type body (T1), semi-lug body (T2), full-lug body (T4) or U-section body with flat faces (T5). Body types T2 and T4 are suitable for downstream dismantling and dead-end service with counterflange. Connections to EN, ASME, JIS.

DANAÏS 150

DANAÏS 150

Double-offset butterfly valve, with plastomer seat (also in fire-safe design), metal seat or elastomer seat (FKM [VITON R] or NBR [Nitrile]). Lever or manual gearbox, pneumatic, electric or hydraulic actuator. Body made of nodular cast iron, cast steel, stainless steel, aluminium bronze or duplex stainless steel (254 SMO). Wafer-type body (T1), full-lug body (T4), T4 suitable for downstream dismantling and dead-end service with counterflange. Connections to EN, ASME, JIS. Fire-safe design tested and certified to API 607.

Illustration of the phases of a product life cycle: Consultation and analysis, commissioning, operation and repair

Service at KSB SupremeServ means being fully looked after

KSB SupremeServ offers you a comprehensive range of services and spare parts for pumps, valves and other equipment – including for products from other manufacturers – from face-to-face consultation to installation, commissioning, maintenance and repair. More than 3500 specialists in over 190 service centres worldwide are available around the clock, seven days a week. Concentrate on your core business – and let us take care of the rest.

3D printing for pumps and valves

3D Printing

3D printing opens up new possibilities in spare parts procurement. An ideal solution if you need a spare part quickly.

  • Additive manufacturing of spare parts
  • Swift delivery