Produksi bahan kimia untuk konsumen
Pompa dan katup KSB menjamin performa tanpa masalah untuk proses yang aman, fleksibel, dan hemat biaya.
The production of household or personal care chemicals must be hygienic, effective and easy on the environment. We help you meet all the applicable standards, so you can focus on satisfying and exceeding your targets.
Pompa kimia yang tepat untuk keamanan maksimal
Pompa KSB: cocok dengan proses kimia bagi konsumen secara sempurna
- MegaCPK adalah produk unggulan di kelasnya: pompa standar terbaik di industri kimia. Komponen hidraulik yang teroptimasi memberi standar baru dalam efisiensi energi, sementara nilai NPSH yang rendah menjamin pengoperasian dengan tingkat kebisingan rendah.
- Pompa penggerak magnetik (magnetic drive) Magnochem kami, yang tersedia dalam berbagai model, memenuhi persyaratan paling ketat dari pelanggan kami.
- CPKN adalah pilihan ideal untuk mengantar media organik dan anorganik yang agresif dalam teknik proses kimia.
- Sedangkan pompa imersi vertikal (vertical submsersible) Estigia kami tersedia dalam model ATEX.
Bagaimana KSB mendukung produksi bahan kimia untuk konsumen
MegaCPK
Horizontal radially split volute casing pump in back pull-out design, with radial impeller, single-entry, single-stage, to DIN EN ISO 5199, dimensions to DIN EN ISO 2858, complemented by nominal diameters DN25 and ≥DN200, in large range of material and seal variants; also available as a variant with "wet" shaft and conical seal chamber. ATEX-compliant version available.
Magnochem
Horizontal seal-less volute casing pump in back pull-out design, with magnetic drive, to DIN EN ISO 2858 / ISO 5199, with radial impeller, single-entry, single-stage. ATEX-compliant version available.
Estigia
Vertical immersion pump for wet installation, with various impeller types designed to meet specific fluid requirements. Supplied with discharge pipe extending above the cover plate, DN according to nominal flow rate. Sealing by lip seal, single or double cartridge mechanical seal. ATEX-compliant version available.
KE
Centred-disc butterfly valve with ISO 5211 compliant square shaft end and PFA liner. With lever, manual gearbox, pneumatic or electric actuator. With wafer-type body (T1), full-lug body (T4) or U-section body with raised faces (T6). EN, ASME, JIS connections possible.
ISORIA 10/16
Centred-disc butterfly valve with ISO 5211 compliant square shaft end, sealed by elastomer liner, with lever or manual gearbox, pneumatic, electric or hydraulic actuator. Wafer-type body (T1), semi-lug body (T2), full-lug body (T4) or U-section body with flat faces (T5). Body types T2 and T4 are suitable for downstream dismantling and dead-end service with counterflange. Connections to EN, ASME, JIS.
SISTO-20
Weir-type diaphragm valve to DIN/EN with flanged ends, threaded socket ends or socket weld ends, in straight-way pattern; shut-off and sealing to atmosphere by supported and confined diaphragm; body with coating or lining, position indicator with integrated stem protection. All moving parts are separated from the fluid by the diaphragm. Maintenance-free.
