Amarex KRT Submersible motor pump

Submersible motor pump Amarex KRT

Horizontal or vertical single-stage submersible motor pump in close-coupled design, with various next-generation impeller types, for wet or dry installation, stationary or transportable version, with energy-saving motor and models for use in potentially explosive atmospheres.
See all documents and downloads

Main Applications

  • Waste water management
  • Service water supply systems
  • Disposal
  • Waste water treatment plants

Technical Data

Max. flow rate
10080 m3/h
Max. head
120 m
Max. allowed working pressure
12 bar
Maximum allowable fluid temperature
60 °C

Amarex KRT with cooling jacket

The KSB Amarex KRT range of waste water pumps featuring jacket-cooled drives. They are designed to transport untreated waste water in municipal and industrial waste water management. The new pump sets are available with drive ratings of 10–30 kW and are suitable for vertical or horizontal dry installationThe pump sets meet all explosion protection requirements set out in the ATEX, FM and CSA standards.

Amarex KRT with cooling jacket

The KSB Amarex KRT range of waste water pumps featuring jacket-cooled drives. They are designed to transport untreated waste water in municipal and industrial waste water management. The new pump sets are available with drive ratings of 10–30 kW and are suitable for vertical or horizontal dry installationThe pump sets meet all explosion protection requirements set out in the ATEX, FM and CSA standards.

Technical Data

Function
Pump
Connection type
Flange
Drive concept
With electric actuator
Max. flow rate
10080 m3/h
Min. flow rate
0.1 m3/h
Max. head
120 m
Min. head
0.1 m
Mains frequency
50 Hz,
60 Hz
Mains voltage
200 V,
208 V,
220 V,
230 V,
240 V,
380 V,
400 V,
415 V,
440 V,
460 V,
480 V,
500 V,
525 V,
575 V,
600 V,
660 V,
690 V
Casing material
EN-GJL-250,
EN-GJS-500-7,
EN-GJN-HB555(XCR14),
1.4517
Nominal pressure
PN 10,
PN 16,
CL 125,
CL 150
Max. allowed working pressure
12 bar
Suction behaviour
Non-self-priming
Maximum allowable fluid temperature
60 °C
Minimum allowable fluid temperature
0 °C

Sectional Drawings