Dec 12, 202510 min read

Valves in heating networks

Valves are vital components of modern heating networks that control fluids while ensuring smooth operation. However, not every valve design is suitable for every application.

Find out which valves perform best under which conditions and which requirements they need to meet with regard to quality and service life.

Valves are vital components of modern heating networks that control fluids while ensuring smooth operation. However, not every valve design is suitable for every application.

Find out which valves perform best under which conditions and which requirements they need to meet with regard to quality and service life.

Invisible heroes of the heating transition

When we think about the energy transition, the first thing that comes to mind is usually solar panels, wind turbines or heat pumps. But a crucial part of this transformation often remains hidden away beneath our roads, in shafts and technical facilities: district heating networks. They form the backbone of a sustainable heat supply in cities and communities. And at the centre of it all, inconspicuous yet essential, valves are hard at work. By controlling and shutting off the fluid handled, they ensure that the heat arrives reliably and efficiently exactly where it is needed.

This article highlights the key role played by valves in modern heating networks, explaining the variety of designs available and the requirements valves need to meet with regard to quality, durability and sustainability. Because without valves, heating networks simply would not be possible – and neither would the climate-friendly heating of future.

Invisible heroes of the heating transition

The attached schematic diagram illustrates the structure of a modern heating network. It shows how the different heat sources – such as combined heat and power plants, large heat pumps, industrial waste heat, data centres and environmental heat from rivers or lakes – all feed into a common district heating system. The system is supplemented by a thermal store, which serves as a buffer and supports the demand-driven supply of heat.

The generated heat is transported to various consumers via a branched network of pipes. These include municipal facilities such as residential and public buildings as well as industrial consumers requiring large amounts of heat. The diagram distinguishes between generators (red) and consumers (green), highlighting the direction in which thermal energy flows in the network.

This visualisation underlines the versatility and flexibility of modern heating networks, which allow both centralised and decentralised feed-in. It also shows how sustainable and efficient operation can be achieved by integrating different energy sources, in particular renewable and recovered heat.

The first district heating networks were laid in New York, USA, around 150 years ago. The idea of transporting and distributing heat over long distances was very popular, as it offered many advantages for prosperity. Buildings could be connected to a heating network and were supplied with external heat for heating and hot water. In those days, decentralised hand-fired coal stoves were the standard source of heating in buildings. In Europe, Germany was the first country to install heating networks around 1900. Since then, heating networks have developed over the course of four generations of technology.

The first generation used steam as a heat transfer medium at temperatures of 130 to 200 °C, which led to high losses, inefficient systems and the risk of scalding. The second generation operated at temperatures of 100 to 130 °C and the third at around 95 °C. Lower temperatures were supported by better thermal insulation of the buildings, which also reduced the risk of accidents caused by scalding. Today, hot water networks are primarily used and only a small number of steam networks still exist. Most heating networks are based on the second, third and fourth generation of technology, with the fourth generation using temperatures of around 70 °C.

There is already talk of the fifth generation of heating networks for the future which will operate at network temperatures of 10 to 30 °C. Decentralised heat pumps will then be used to increase the temperature up to consumption level. This technology enables the use of many different heat sources and promotes the expansion of renewable and environmentally friendly energy sources. Another advantage of these cold networks is that they can extract heat from buildings on hot summer days and thus cool them down. However, lower temperature levels within the network need to be regulated, requiring the precise control and distribution of the heat transfer media, which is where various valves come into play.

A variety of valves in heating networks

Many different types of valves are used in heating networks which are distinguished by their function or design characteristics. On the generator side, consultants often use butterfly valves, gate valves or globe valves, as these are easily accessible for maintenance purposes and are more cost-effective than ball valves for large nominal sizes. Butterfly valves and gate valves are used for shutting off fluids. These valves are usually in an open or closed position and must function perfectly and close tightly when required. Control valves are used on the generator side for flow control and mixing. Various poppet valves with linear movement are used for this purpose, which are controlled by an electric actuator or the process fluid, depending on the application. At high temperatures, metal-seated valves are generally used, consisting of a metal seat and closing element. At lower temperatures below 80 °C, soft-seated valves are the better choice, as they are cheaper to manufacture and more resistant to possible particles in the heat transfer medium.

In heating networks, low-maintenance valves with low hydraulic resistance are preferred. Ball valves with a single-piece body and butt weld ends are ideal as they consist of just a few components and offer a full flow cross-section in the open position. They are operated underground in a valve pit or via a valve trim.

In so-called zone controlled HVAC systems, special valves are used that are operated according to demand, ensuring hydraulic balancing. The control characteristics of these valves are particularly important here. At transfer stations, valves are needed for shutting off and, if necessary, regulating the fluid handled. Furthermore, check valves, air valves and safety valves are also found in heating networks.

KSB valve portfolio for heating networks

Selecting the right valve is the key

Valves in district heating networks need to be particularly durable, as they are often difficult to access and would incur high costs if they were to malfunction. The quality of the valves plays a major role for operators, which is why proven valve types and manufacturers are mainly used. Most specifications require the current standards such as DIN EN 13941-1, DIN EN 488 and EN 253 and stipulate the construction materials. When selecting the material, it is important to consider not only its resistance but also the long-term thermal exposure.

Shut-off valves with butt weld ends are used for underground pipes, as they form a perfect positive-locking connection with the pipe and no additional sealing elements or screw elements are required, minimising the risk of leakage. These welded joints also offer greater safety in the event of deformation underground.

As valves should be actuated as slowly as possible to avoid pressure surges in the long steel pipes, the high flow velocity in the intermediate positions of the valves can cause damage to sealing elements. Manufacturers have developed special solutions for this in terms of the choice of materials and the design of the individual components.

Although ball valves are technically preferred for large nominal sizes, they are expensive as they require a lot of material and sophisticated machining. Proven alternatives are butterfly valves and gate valves. Gate valves have a lower hydraulic resistance, but a high centre-to-top height, which requires more space. Butterfly valves generally have a greater flow resistance due to the valve disc, but require less space as the shaft rotates and does not rise. Due to their simpler design, butterfly valves are lighter and cheaper to purchase for larger nominal sizes.

The quality of the products is also reflected in the sealing to atmosphere over many decades. District heating water is specially treated and additives are added to ensure that the system lasts a long time, does not corrode and produces fewer deposits. If this fluid were to escape due to a leak, it would have to be refilled and result in additional costs. In addition, it would be detrimental to soil and environmental protection if the fluid were to escape and seep into the ground in large quantities.

The future of valves in heating networks

District heating offers huge opportunities for achieving climate targets. Operators are switching to environmentally friendly technologies and reducing the need for fossil fuels. The transition is not only good for people and the environment, but also offers economic opportunities for companies to develop new solutions and make them available on the market. In addition to the high quality requirements, valves for heating networks increasingly feature intelligent solutions in which individual components exchange information and valves are able to do more than just open and close. The future will require valves that further improve the overall system, are particularly durable and are hydraulically optimised.

BOA-Systronic ePIC

Documents

Smart and pressure-independent measurement and control valve (2-way energy valve) for monitoring and controlling flow direction, volume flow rate, supply and return temperature, thermal output and quantity of heat as well as automating the hydraulic balancing process. With integrated ultrasonic flow rate measurement and temperature sensor not in contact with the fluid handled; includes: 2 additional Pt1000 temperature sensors for measuring the supply and return temperature, integrated basic control functions (position, flow rate, temperature, thermal output), integrated process optimisation functions (delta-T management and limitation features). Also available with electrostatic plastic coating (EKB) and DVGW-certified for drinking water.

Details

BOA-CVE H

Documents

Service-friendly control valve to DIN/EN with flanged ends, either with linear or equal-percentage control characteristic at Kvs values of 0.1 to 630 m³/h and closing pressures of up to 40 bar; all internal parts are easy to replace without special tools, including the reversible seat; noise level reduced by standard two-stage pressure reduction combining a parabolic plug and multi-hole cage; with electric actuator.

Details

BOA-CVP H

Documents

Details

BOA-H

Documents

Bellows-type globe valve to DIN/EN with flanged ends, with on/off disc or throttling plug, standard position indicator with colour coding for identification of valve design, replaceable valve disc; bellows protected when valve is in fully open position; seat/disc interface made of wear and corrosion resistant chrome steel or chrome nickel steel.

Details

DANAÏS 150

Documents

Double-offset butterfly valve with ISO 5211 compliant square shaft end, with plastomer seat (also in fire-safe design), metal seat or elastomer seat (FKM [VITON R] or NBR [nitrile]). Lever or manual gearbox, pneumatic, electric or hydraulic actuator. Body made of nodular cast iron, cast steel, stainless steel or duplex stainless steel (254 SMO). Wafer-type body (T1), full-lug body (T4), T4 suitable for downstream dismantling and dead-end service with counterflange. Connections to EN, ASME or JIS. Fire-safe design tested and certified to API 607. Fugitive emissions performance tested and certified to EN ISO 15848-1. ATEX-compliant version in accordance with Directive 2014/34/EU.

Details

BOA-R

Documents

Lift check valve to DIN/EN with flanged ends, spring-loaded valve disc, maintenance-free.

Details

Don’t hesitate to contact us.

Would you like further information on KSB? Or have you got any questions surrounding our pumps, valves, services and spare parts? Just contact us. We would love to talk to you.

Find your contact

Stay up to date with the KSB Newsletter.

Want to make sure you never miss the latest news? With the KSB Newsletter you will receive information on our products and solutions, current promotions and events as well as fascinating insights into the world of KSB.