HERA-BD Gate valve
Gate valve

HERA-BD

Knife gate valve to DIN/EN with wafer-type single-piece or two-piece body made of nodular cast iron, bi-directional, with gland packing, non-rising stem, corrosion-protected by epoxy coating.
See all documents and downloads

Technical Data

  • Nominal pressurePN 10
  • Max. nominal sizeDN 1200
  • Max. allowed fluid temperature120 °C

Benefits

  • All cast iron and steel components are protected against corrosion by high-quality epoxy coating.
  • Robust and compact steel yoke for straightforward mounting of pneumatic and electric actuators and position switches. A hard anodised aluminium NAMUR adapter plate attached to the actuator allows sensors or solenoid valves to be quickly installed (plug & run).
  • Reliable and service-friendly stem seal: The gland packing is made of PTFE impregnated fibre and can be re-adjusted during operation. There is no need to remove the valve from the piping to replace the packing.

Material number list – HERA-BD

19 products
NameNominal pressureNominal size InletDrive conceptConnection type InletWeightMaterial numberPrice
HERA DN 100 V4 PTFE HWPN 10DN 100With handwheelFlange DIN/EN12 Kilogram48014050
HERA DN 100 V4 PTFE PAPN 10DN 100With pneumatic actuatorFlange DIN/EN13.5 Kilogram48014061
HERA DN 125 V4 PTFE HWPN 10DN 125With handwheelFlange DIN/EN15 Kilogram48014051
HERA DN 150 V4 PTFE HWPN 10DN 150With handwheelFlange DIN/EN17 Kilogram48014052
HERA DN 150 V4 PTFE PAPN 10DN 150With pneumatic actuatorFlange DIN/EN22 Kilogram48014063

Documents

TitleFormatSizeLast change
icon download-pdfHERA-BD (7328.8_EN)pdf4.956/18/2020
TitleFormatSizeLast change
icon download-pdfHERA-BD (7328.1_EN)pdf1.587/10/2019
icon download-pdfHERA-BD (7328.22_EN)pdf2.087/18/2019
TitleFormatSizeLast change
HERA-BD (7328.541_EN)zip0.276/30/2019
icon download-pdfHERA-BD (7328.521_EN)pdf0.015/24/2019

Technical Data

  • FunctionShut off/control flow
  • Connection typeFlange
  • Design concept DriveWith electric actuator, With handwheel, Lever, With pneumatic actuator
  • Casing material1876
  • Nominal pressurePN 10
  • Max. nominal sizeDN 1200
  • Min. nominal sizeDN 50
  • Max. allowed fluid temperature120 °C
  • Min. allowed fluid temperature-10 °C