Country and language selection

International websites (English) (Deutsch)


Americas / Oceania

Africa and Middle East

Asia / Pacific

STAAL 40 AKD/AKDS Gate valve
Gate valve


Gate valve to DIN/EN with flanged ends (AKD) or butt weld ends (AKDS), with bolted bonnet, body of forged or welded construction, non-rotating stem, split wedge with flexibly mounted discs for precise alignment with the body seats. Seat/disc interface made of wear and corrosion resistant 17 % chrome steel.
See all documents and downloads

Technical Data

  • Nominal pressurePN 10, PN 16, PN 25, PN 40
  • Max. nominal sizeDN 900
  • Max. allowed fluid temperature450 °C


  • Reliable, tight shut-off and service-friendly design
    • Wedge holder with flexibly mounted split wedge. Precise alignment of wedge discs with body seats; wedge discs are easy to replace.
    • Actuating moments are absorbed by the wedge holder guided in the body. No additional loads on the wedge discs and the seat/disc interface.

Material number list – STAAL 40 AKD/AKDS

21 products
NameNominal pressureNominal size InletDrive conceptConnection type InletWeightMaterial numberPrice
STAAL®40 AKD PN10/16 DN100 P250GHPN 10DN 100With handwheelFlange DIN/EN61 Kilogram01584265
STAAL®40 AKD PN10/16 DN150 P250GHPN 10DN 150With handwheelFlange DIN/EN121 Kilogram01487109
STAAL®40 AKD PN10/16/25 DN80 P250GHPN 10DN 80With handwheelFlange DIN/EN33 Kilogram01584263
STAAL®40 AKD PN10/16/25/40 DN50 P250GHPN 10DN 50With handwheelFlange DIN/EN33 Kilogram01584262
STAAL®40 AKD PN16 DN200 P250GHPN 16DN 200With handwheelFlange DIN/EN182 Kilogram01487110


TitleFormatSizeLast change
Declaration of Conformity (0570.8520_EN)PDF0.174/19/2021
TitleFormatSizeLast change
Operating manual (0570.81_EN)PDF11.394/19/2021
Operating manual STAAL 40 AKD/AKDS (7364.8_EN)pdf0.45/24/2019
TitleFormatSizeLast change
STAAL 40 AKD/AKDS (7364.1_EN)PDF1.884/19/2021
TitleFormatSizeLast change
STAAL40 AKD/AKDS (7364.520_EN)ZIP0.024/19/2021

Technical Data

  • FunctionShut off/control flow
  • Connection typeFlange, Butt weld ends
  • Design concept DriveWith electric actuator, With handwheel
  • Casing materialP265GH, P250GH
  • Nominal pressurePN 10, PN 16, PN 25, PN 40
  • Max. nominal sizeDN 900
  • Min. nominal sizeDN 50
  • Max. allowed fluid temperature450 °C
  • Min. allowed fluid temperature-10 °C

Sectional Drawings