Man in a raincoat on a flooded street

Flood Control

Consultants, engineering contractors and operators around the globe rely on flood pumps from KSB

Every year hundreds of thousands of people worldwide become victims of stormwater and flooding. KSB drainage pumps help to safeguard living space and protect lives.

In KSB you have a strong partner in flood control

When it comes to flood control, KSB helps to safeguard living space and protect lives with innovative pumps. Highly advanced pumping equipment ensures optimal drainage of flood zones – quickly, reliably and cost-efficiently. Drainage pumps from KSB work reliably and effectively in low-lift pumping stations and drainage systems.

The output from KSB flood pumps can be adjusted to the required flow rate and head via speed control. This ensures substantial cost savings as unused energy is not lost.

In addition to robust pumps, a flow-optimised system also requires that all components are correctly incorporated in the structure. Our application specialists are on hand with the right expertise to help you tackle this task. You stand to benefit from the right products and the right consultation – from a single source.

Flood control requires pumps that deliver full pump power output instantly.

Stormwater and flooding place exacting demands on drainage pumps. Even after periods of prolonged standstill, they must start up reliably and instantly deliver maximum performance. Flood water pumps handle large volumes of water at relatively low heads, for example pumping rainwater from lower-level areas across dams and dikes. The problem in this case: The quantities of water vary depending on the season, or are dependent on the tide. The stations must cope with constantly fluctuating flow rates and heads while still ensuring fast and optimal drainage.

Pumps from KSB: top grades for performance, service life and energy efficiency

Thanks to a wide range of different pump types, KSB offers the optimal pump for every application, e.g. the Amacan pump for use in low-lift pumping stations, the SEZ tubular casing pump or the Beveron volute casing pump.

KSB flood water pumps are available with plain bearings in various robust materials, e.g. wear-resistant Residur® ceramic bearings lubricated by the fluid handled. This makes them particularly efficient and environmentally friendly. To prevent clogging, KSB drainage pumps also feature impellers with large free passages. Before the pumps are actually put to use, KSB provides proof of their performance data at its own test facilities.

Robust pumps alone do not guarantee a perfectly working system. KSB therefore offers a comprehensive range of engineering services such as computational fluid dynamics analyses (CFD) to support consultants, engineering contractors and operators. Model tests simulate intake conditions or flow velocities and help to optimise intake chambers. With KSB Helps and KSB EasySelect, there are also two software solutions for pump selection available. 

KSB strives constantly to achieve optimum and efficient systems, and our experts are on hand to offer the best possible support for your project through all phases of system planning and construction. Thanks to decades of experience with international large-scale projects, KSB benefits from a broad base of application knowledge.

Our portfolio

KSB offers a wide range of products for flood control

  • Dry-installed waste water pumps
  • Tubular casing pumps
  • Submersible pumps in discharge tubes
  • Pumps for low-lift pumping stations
  • Volute casing pumps
  • Submersible motor pumps

Applications include

  • Drainage
  • Water pollution control
  • Flood control
  • Pumping stations
  • Stormwater relief structures
  • Low-lift pumping stations

Your benefits

  • Robust pumps of various designs for fast and efficient drainage of flooded areas
  • Expert advice for consultants, engineering contractors and operators thanks to extensive experience in numerous international flood control projects
  • Reliable international supplier of pumps and service – on the market for 150 years
  • Optimised selection of pumps with KSB Helps and KSB EasySelect
  • Service and spare parts solutions covering the entire product life cycle complemented by 24-hour service from more than 3000 specialists in over 170 service centres worldwide

Find suitable pumps for flood control

Whether rainwater pumps or pumps for use in low-lift pumping stations: KSB offers the right product whatever the requirements of flood control.

Amacan P

Amacan P

Wet-installed submersible motor pump for installation in discharge tubes, with axial propeller in ECB design, single-stage, single-entry. ATEX-compliant version available.

SEZ

SEZ

Vertical tubular casing pump with open mixed flow impeller, pump intake with inlet nozzle or suction elbow, pull-out design available, discharge nozzle arranged above- or underfloor, flanges to DIN or ANSI standards available.

SNW

SNW

Vertical tubular casing pump with mixed flow impeller, single-stage, with maintenance-free Residur bearings, discharge nozzle arranged above- or underfloor.

Find suitable valves for flood control

HERA-BD

HERA-BD

Knife gate valve to DIN/EN with wafer-type single-piece or two-piece body made of nodular cast iron, bi-directional, with gland packing, non-rising stem, corrosion-protected by epoxy coating.

COBRA-SGP/SGO

COBRA-SGP/SGO

Gate valve to DIN/EN with flanged ends, elastomer-coated wedge, bolted bonnet, rotating stem, inside screw, body made of nodular cast iron.

BOAVENT-SVA

BOAVENT-SVA

Automatic air valve with one float and three functions. With flanged ends or threaded ends, body made of nodular cast iron, single-chamber design with polypropylene float. The air valve ensures proper operation of piping systems. It is specially designed to allow the entry and discharge of large volumes of air and the release of air pockets in working conditions.

Illustration of the phases of a product life cycle: Consultation and analysis, commissioning, operation and repair

Service at KSB SupremeServ means being fully looked after

KSB SupremeServ offers you a comprehensive range of services and spare parts for pumps and other equipment – including for products from other manufacturers – from face-to-face consultation to installation, commissioning, maintenance and repair. More than 3500 specialists in over 190 service centres worldwide are available around the clock, seven days a week. Concentrate on your core business – and let us take care of the rest.

Maintenance inspection management

Maintenance inspection management

Inspecting and repairing pump sets while keeping downtimes short: KSB Service offers comprehensive maintenance inspection management for industrial facilities and power stations.

  • Pump inspection
3D printing for pumps and valves

3D Printing

3D printing opens up new possibilities in spare parts procurement. An ideal solution if you need a spare part quickly.

  • Additive manufacturing of spare parts
  • Swift delivery
Reverse Engineering for pumps and valves

Reverse Engineering

Reverse engineering makes it possible to quickly manufacture spare parts for pumps and other rotating equipment that are hard to find or no longer available.

  • Optimisation thanks to engineering services
  • Quick reproduction of spare parts