Country, region and language selection

International websites

Europe

Americas / Oceania

Africa and Middle East

Asia / Pacific

Palazzo Grassi

Palazzo Grassi – where culture meets sustainability

An old building kitted out with modern technology: KSB pumps and valves for heating, air-conditioning, water and sanitation systems help to save 30 % of energy in the Palazzo Grassi.

The project: Palazzo Grassi, an 18th century Venetian palace

The Palazzo Grassi is one of Venice’s most famous buildings. The three-storey structure from the 18th century stands directly on the Canal Grande. It was created by architect Giorgio Massari in the transitional style between Late Baroque and Classicism. He was commissioned by the Grassi family.

Today, the impressive building houses a renowned museum of contemporary art. The exhibits belong to the French entrepreneur and collector François-Henri Pinault who bought the building in 2006.

An energy analysis revealed that the palace’s energy consumption was enormous, making energy optimisation measures absolutely necessary. The task was to install state-of-the art equipment for heating, air-conditioning, water and sanitation systems. Technology designed to meet the demands of maximum energy efficiency and environmental friendliness.


The challenge: Cutting-edge technology in an old building

The challenge was to significantly reduce energy consumption in the Palazzo Grassi – and thus save costs – by using efficient and environmentally friendly pumps and valves.


The solution: A complete range of technology and expertise covering all systems

To meet the specific requirements of the Palazzo Grassi, KSB supplied a complete range of pumps and valves for heating, air-conditioning, water and sanitation systems. This comprised 131 shut-off and control valves, 24 swing check valves, 29 strainers, 45 expansion joints and 5 Etabloc pumps.

The main criterion was the high efficiency of the pumps driven by KSB SuPremE IE5* motors. The magnet-less pump drive impresses with high efficiency in all load ranges, enabling maximum energy savings.

All pumps were also fitted with a PumpDrive variable speed system and PumpMeter pump monitoring unit. In addition to installing these new pumps, KSB carried out maintenance of some of the older pumps.

The project took eight months from its start in July 2015, with the products being delivered in November 2015 and final completion in February 2016.

The bottom line: KSB’s solution has enabled a substantial reduction (30 %) in energy consumption

30 % lower energy costs thanks to KSB solutions


Data I Facts I Figures

  • Location: Venedig
  • Application: Building Services
  • Project: Maintenance of older pumps, installation of KSB pumps and valves
  • Duration: July 2015 to February 2016 (8 months)
  • KSB Products used: Pumps and valves for heating, air-conditioning, water and sanitation systems✓ Energy-efficient & sustainable ✓ 30 % energy reductions
  • Commissioned: February 2016

Products used

Etabloc

Etabloc

Eentraps blokpomp met spiraalvormig huis, met capaciteiten volgens EN 733, met verwisselbare asbus en slijtringen, met op de motor gemonteerd toerenregelsysteem. Met KSB SuPremE, een magneetvrije synchroon-reluctantiemotor (uitzondering: motorgrootten 0,55 kW / 0,75 kW met 1500 min⁻¹ zijn uitgerust met permanente magneten) van efficiëntieklasse IE4/IE5 volgens IEC TS 60034-30-2: 2016, voor bedrijf met toerenregelsysteem type KSB PumpDrive 2 of KSB PumpDrive 2 Eco zonder rotorpositiesensor. Bevestigingspunten volgens EN 50347, maten van de ommanteling volgens DIN V 42673 (07-2011). ATEX-uitvoering verkrijgbaar.

KSB SuPremE

KSB SuPremE

IEC-compatibele, sensorloze, magneetvrije synchroon-reluctantiemotor (uitzondering: motorgrootten 0,55 kW / 0,75 kW met 1500 min⁻¹ zijn uitgevoerd met permanentmagneten) van rendementsklasse IE4/IE5 (Super/Ultra Premium Efficiency) volgens IEC TS 60034-30-2:2016, voor bedrijf met toerenregelsysteem KSB PumpDrive 2, PumpDrive 2 Eco of PumpDrive R. Geschikt voor aansluiting op een 3-fasig spanningsnet 380-480 V (via PumpDrive). De bevestigingspunten voldoen aan EN 50347, waardoor IEC-normmotor-compatibel gebruik en de volledige uitwisselbaarheid met IE2- of IE3-asynchroon-normmotoren gegarandeerd is. De maten van de ommanteling liggen binnen de door DIN V 42673 (07-2011) voorgestelde grenzen voor IE2/IE3-motoren. Regeling van de motor vindt plaats zonder rotorpositiesensor. Het rendement van de motor is ook bij 25 % van het nominale vermogen en een kwadratische karakteristiek van de koppel-toerental-grafiek > 95 % van het nominale rendement. De uitvoering van de motor is magneetvrij, de zogenaamde "zeldzame aarden" zijn bij de productie niet gebruikt. De productie van de aandrijving is duurzaam en milieuvriendelijk.

PumpDrive R (KSB202)

PumpDrive R (KSB202)

Zelfgekoelde frequentieregelaar met modulaire opbouw, die een traploze toerentalwijziging van asynchrone en synchrone reluctantiemotoren via analoge normsignalen, veldbus of bedieningspaneel mogelijk maakt. Door de zelfkoeling van de PumpDrive R is montage aan de wand en in een schakelkast mogelijk. Regeling van maximaal 6 pompen zonder extra regelaar. Ten opzichte van de PumpDrive 2 wordt het vermogensraster bij de PumpDrive R tot een nominaal vermogen van 250 kW (standaard)/1400 kW (op aanvraag) verhoogd.

BOA-Compact

BOA-Compact

Afsluiter conform DIN/EN met flenzen, in korte bouwlengte EN 558/14, uitvoering met schuine zitting en recht bovendeel, eendelig huis, EPDM-ommantelde regelconus, zachtdichtende doorlaatafdichting en terugstroomafdichting, standindicator, vastzetinrichting, slagbegrenzing, isolatiekap met dauwpuntblokkering, onderhoudsvrij, volledig isoleerbaar.