Now also available for large-scale water projects: KSB Multitec 200 / 250

The Multitec pump series covers an outstanding range of applications. The wide choice of materials and variants makes the Multitec multistage ring-section pump a true all-rounder. With its Multitec 200 / 250, KSB now offers you a pump for large-scale water projects. Multitec 200 / 250

The Multitec family has a proven track record, especially in applications where water needs to be pumped at a high pressure over long distances. The pumps of this series are suitable for a large variety of applications. 

Applications of the KSB Multitec series:

  • Water supply, drinking water supply, irrigation
  • Pressure boosting
  • Fossil-fuelled power stations
  • Condensate transport, boiler feed systems
  • Heating systems, hot water supply
  • Filtration systems and washing plants
  • Fire protection systems
  • Snow-making systems
  • Industrial plants
  • Desalination plants
  • Geothermal energy and heat recovery systems

The new Multitec 200 / 250 for large-scale water projects

Multitec 200 / 250 is KSB’s new addition for large-scale projects in drinking water and general water supply. Multitec’s well-proven design has also been applied to the 200 / 250 size. The pump is easy to use, reliable to operate and extremely energy-efficient. Ease of service is another of Multitec 200 / 250’s characteristics.

Multitec 200 / 250 easily pumps flow rates of up to 1500 m³/h at heads of up to 400 m. And that at temperatures of up to 60°C for non-aggressive fluids. Multitec 200 / 250 is also ACS-certified for drinking water.

Benefits of the new Multitec 200 / 250 at a glance: 

Operating reliability

  • Special impeller designed for good suction performance and smooth running even under poor suction conditions
  • Axial thrust balancing ensured by balancing drum for a long service life
  • Casing and diffuser wear rings for increased protection against wear
  • Casings made of nodular cast iron produced at European foundries

Energy efficiency

  • High system efficiency with optimised hydraulic design and impeller trimmed to the duty point
  • Energy savings of up to 60 percent for pump sets equipped with PumpDrive R and PumpMeter 

Ease of service

  • Suction and discharge nozzles can be turned in steps of 90° and adjusted on site.
  • Easy dismantling of bearing and shaft seal without the need to remove hydraulic components thanks to:
    • Bearing and shaft sleeves
    • Separate seal chamber and bearing housing
Additional Information