Country and language selection

International websites

Europe

Americas / Oceania

Africa and Middle East

Asia / Pacific

Etanorm-R Dry-installed pump
Dry-installed pump

Etanorm-R

Horizontal long-coupled, single-stage (two-stage for pump size 125-500) volute casing pump in back pull-out design, with replaceable shaft sleeves / shaft protecting sleeves and casing wear rings, with magnetless KSB SuPremE motor of efficiency class IE4/IE5 and PumpDrive variable speed system; ATEX-compliant version available.
See all documents and downloads

Main Applications

  • Water supply systems
  • Spray irrigation systems
  • Drainage systems
  • Air-conditioning systems
Show all applications

Technical Data

  • Maximum head TSG101 m
  • Minimum head TSG2 m
  • Max allow ds work.pressure TSG16 bar
  • Max allowed fluid temp TSG140 °C

Your KSB contact: We’re here to support you

Do you need any assistance finding the right material number?
We’ll soon provide a list so you can directly place your purchase order.
Meanwhile please contact our support:

Your local contact


Your KSB contact : We’re here to support you

Benefits

  • Operating costs reduced by trimming the nominal impeller diameter to match the specified duty point
  • Little wear, low vibration levels and excellent smooth running characteristics thanks to good suction performance and virtually cavitation-free operation across a wide operating range
  • Pioneering energy efficiency by variable speed operation in combination with PumpDrive. When used in combination with the KSB SuPremE motor , the pump achieves efficiency level IE4 to IEC/CD 60034-30 Ed. 2 already today.

Certificates

  • E06A_320572939-1_1
    Certified quality management to ISO 9001
    All countries

Technical Data

  • Component functionPump
  • Connection type InletFlange
  • Drive conceptWith electric actuator
  • Maximum flow rate TSG2280 m3/h
  • Minimum flow rate TSG1.5 m3/h
  • Maximum head TSG101 m
  • Minimum head TSG2 m
  • Mains frequency50 Hz, 60 Hz
  • Mains voltage400 V, 460 V
  • Mtrl Hydraulic casingEN-GJL-250/A48 CL 35B, EN-GJS-400-15/A536 GRADE 60-40-18
  • Nominal pressure OutletPN 16
  • Max allow ds work.pressure TSG16 bar
  • Suction behaviourNon-self-priming
  • Max allowed fluid temp TSG140 °C
  • Min allowed fluid temp TSG-30 °C

Characteristic curves

  • Download
  • Download
  • Download
  • Download

Sectional Drawings

  • Download

Documents

TitleFormatSizeLast change
Etanorm-RX (1211.83_EN)PDF2.412021/4/19
TitleFormatSizeLast change
Etanorm-R (1211.5_EN)PDF62021/4/19