Panier

Country and language selection

International websites

Europe

Americas / Oceania

Africa and Middle East

Asia / Pacific

Provides energy for an entire city: The Thassalia marine thermal energy project

The Thassalia seawater plant supplies sustainable energy for buildings with a 500,000 m² surface area. Find out why high-performance pumps from KSB make a major contribution to the project's success.

1. Customer

The French ENGIE Group, based in Paris, is one of the world’s largest energy producers and energy service providers with over 150,000 employees in about 70 countries. Apart from conventional energy generation, the company also focuses on renewable energy sources such as wind power, hydropower and thermal energy.


2. Project

For the population of coastal areas the ocean offers huge energy potentials – which can now, for the first time, be tapped into on a large scale, with KSB’s contribution: In October 2016, Thassalia, a 35 million euro marine thermal plant, was inaugurated in the port of Marseille. The plant harnesses the thermal energy provided by the Mediterranean, supplying sustainable energy for buildings with a 500,000 m² surface area in the new Eco-Cité Euroméditerranée, currently the largest urban renewal project in Southern Europe.

The Thassalia plant significantly contributes to the Eco-Cité Euroméditerranée meeting the French High Quality Environmental Standard for green building. The plant reduces greenhouse gas emissions by 70 %, power consumption by 40 % and water consumption by 65 %.


3. Challenges

KSB was in charge of designing a network for hot and cold water for the entire Eco-Cité district – a highly demanding project, for many reasons:

  • Combined heating and cooling supply
  • Aggressive seawater as transfer fluid
  • Large total area of the Eco-Cité spanning 480 hectares
  • High efficiencies to ensure the lowest possible power consumption
  • Lowest possible noise emissions to protect the people living nearby
  • Fast on-site service for maintenance and repair ensuring smooth operation of the plant 24/7


4. Solution

Seawater from a depth of seven metres is pumped to the thermal system by six high-performance pumps of the CPKN type. Each of these seawater pumps is fitted with a 160 kW variable speed motor. The total flow rate equals 1000 l/s. The aggressive nature of seawater that is heated up to 30 °C in the return system requires the seawater pumps to be well protected against corrosion. All parts in contact with water are therefore made of a special duplex stainless steel – a material developed by KSB called Noridur®. For the same reason, the discs of the ISORIA butterfly valves installed are coated with Halar.

The valves with sizes of up to DN 700 fulfil shut-off and control functions during seawater intake. They are actuated by robust pneumatic or manual actuators. The seawater, which ranges in temperature from about 14 °C in winter to 22 °C in summer, supplies the heat exchangers connected to the thermo-refrigeration pumps. It provides heating when the water is cold and cooling when it is warm. Heating or cooling is then distributed to the Eco-Cité buildings via a hot water network of 60 °C and a separate cooling water network of 5 °C. 

The network with a length of three kilometres requires high-performance pumps for both circuits. The two circuits are each fitted with four powerful standardised chemical pumps of the MegaCPK type. Each of these pumps can achieve heads of between 110 m and 120 m of water. The motor ratings range from 160 kW to 355 kW with an efficiency of up to 84 % at speeds of 1500 rpm to 1750 rpm. 

The valves with sizes of up to DN 700 fulfil shut-off and control functions during seawater intake. They are actuated by robust pneumatic or manual actuators. The seawater, which ranges in temperature from about 14 °C in winter to 22 °C in summer, supplies the heat exchangers connected to the thermo-refrigeration pumps. It provides heating when the water is cold and cooling when it is warm. Heating or cooling is then distributed to the Eco-Cité buildings via a hot water network of 60 °C and a separate cooling water network of 5 °C. 

The network with a length of three kilometres requires high-performance pumps for both circuits. The two circuits are each fitted with four powerful standardised chemical pumps of the MegaCPK type. Each of these pumps can achieve heads of between 110 m and 120 m of water. The motor ratings range from 160 kW to 355 kW with an efficiency of up to 84 % at speeds of 1500 rpm to 1750 rpm. 

Data I Facts I Figures


ENGIE SA

  • Founded in: 1858
  • Employees: 153.090 (Stand 2016)
  • Sales revenue66,6 Mrd. Euro (2016)
  • Industry: energy supply


Thassalia project data

  • Supply of the area to be supplied with hot and cold water: 480 hectares with a building surface area of 500,000 m2


KSB type series used in this project

  • Thermal plant: 6 KSB CPKN pumps as seawater pumps with 160 kW variable speed motors, wetted parts made of corrision-resistant Noridur®, 6 ISORIA butterfly valves with Halar-coated discs, Fluid handled: seawater at a temperature of up to 30 °C
  • Supply network: 8 MegaCPK standardised chemical pumps with motor ratings of 160 to 355 kW (efficiency up to 84 % at speeds between 1500 rpm and 1750 rpm
  • Comissioned: 2016
     


KSB : un des leaders du marché mondial des pompes et de la robinetterie industrielles

Fondée en 1871 à Frankenthal (Allemagne), l’entreprise KSB compte parmi les principaux fabricants de pompes et de robinetterie industrielles depuis plus d’un siècle. Avec plus de 15 500 employés dans le monde entier ainsi que ses propres filiales, sites de production et entreprises de Service, KSB développe et fabrique des pompes sur mesure destinées aux applications les plus diverses.

Les produits du fabricant de pompes expérimenté sont utilisés dans les domaines du bâtiment et de l’industrie, du transport de l’eau et de l’épuration des eaux usées ainsi que dans les processus des centrales électriques. Grâce à un programme innovant de recherche et de développement, KSB est en mesure de satisfaire les exigences les plus variées de sa clientèle. Le fabricant de pompes KSB est renommé pour sa grande expérience et son savoir-faire technique.


Le fabricant de pompes KSB : la solution idéale pour votre installation
Les pompes et la robinetterie industrielles de KSB se prêtent à une large gamme d’applications et offrent un excellent rendement énergétique. Les produits KSB se caractérisent par une technique très innovante et font leurs preuves depuis de nombreuses années dans des installations. C’est le cas notamment de la pompe à eau normalisée Etanorm : avec plus de 1,5 million de groupes motopompes vendus, ce modèle compte parmi les pompes à eau normalisées ayant le plus de succès au niveau mondial.

Les pièces de rechange et les prestations de Service de KSB garantissent la sécurité de fonctionnement des pompes et de la robinetterie industrielles de la marque. L’hydraulique, le génie des matériaux et l’automatisation sont les atouts technologiques du fabricant de pompes KSB et c’est là que réside la clé du succès de ses pompes haute performance.

Un Service compétent dès le début
Grâce à ses nombreux sites de production, le fabricant de pompes KSB assure la proximité avec ses clients et leur garantit un Service de très haut niveau. Des spécialistes certifiés, riches d’une longue expérience, sont les garants d’une excellente qualité. Le Service KSB prend en charge la mise en service, l’inspection, l’entretien et la maintenance de vos pompes, de votre robinetterie et de l’ensemble de vos installations directement sur site. KSB assure également la livraison rapide de pièces de rechange pour vous fournir directement le meilleur Service possible.