Oil and Gas Industry
Crude oil processing – KSB’s quality products spell top safety
In onshore and offshore extraction, in refineries, intermediate storage and downstream applications – KSB products make sure our natural resources are processed safely and reliably.
Optimum functioning and maximum reliability are crucial, not only to ensure smooth processes but also to protect people and the environment.
To process crude oil safely and efficiently all components have to be absolutely reliable. KSB takes utmost care to meet this criterion, particularly when it comes to process pumps used in refineries.
KSB pumps are matched to:
- Extreme temperatures
- Highly volatile hydrocarbons and highly viscous fluids
- Aggressive fluids containing gas, solid particles or abrasive substances
MegaCPK
Horizontal radially split volute casing pump in back pull-out design, with radial impeller, single-entry, single-stage, to DIN EN ISO 2858 / ISO 5199; also available as a variant with "wet" shaft and conical seal chamber. With KSB SuPremE, a magnetless synchronous reluctance motor of efficiency class IE4/IE5 to IEC TS 60034-30-2:2016, for operation with the KSB PumpDrive 2 or KSB PumpDrive 2 Eco variable speed system without rotor position sensors. Motor mounting points in accordance with EN 50347, envelope dimensions in accordance with DIN V 42673 (07-2011). ATEX-compliant version available.
ECOLINE GTC 150-600
Gate valve to ANSI/ASME with flanged ends, cast steel A216 WCB, Trim 8 (Stellite/13 % chrome steel) for Class 150/300/600, Trim 5 (Stellite/Stellite) for Class 600, with bolted bonnet, outside screw and yoke, non-rotating stem, flexible wedge, graphite gland packing, stainless steel/graphite gaskets.
DANAÏS MT II
Double-offset butterfly valve with plastomer seat or metal seat (fire-safe), without gland packing, maintenance-free, with lever or manual gearbox, pneumatic, electric or hydraulic actuator, body made of steel or stainless steel. Wafer-type body (T1), full-lug body (T4) or flanged body (T7) with flat or raised faces. Body types T4 and T7 are suitable for dead-end service. Connections to EN, ASME or JIS. Certified to German TA-Luft Technical Guidelines on Air Quality Control.
