Are you looking for the right software for your automation technology?

KSB makes life easy for its customers by providing a software package for servicing and commissioning automation solutions – including WIBU key download for optimum protection.

PACTware is vendor-independent and fieldbus-independent software for operating field devices. KSB uses this software as a standardised service tool for automation products.

With PACTware KSB customers can load drivers (so-called DTMs = Device Type Managers) for field devices from different manufacturers. They will then be available for selection in an electronic hardware catalogue.

Hardware requirements for the automation tool

A laptop or similar can be used for the display and for setting parameters. It has to be connected to the field device via the RS232 or USB interface (only for PumpDrive 2/PumpDrive 2 Eco). PACTware requires a minimum of 100 MB hard disk space and 50 MB main memory. The laptop or PC should have a Pentium III 400 MHz processor and, ideally, an XGA graphics card. It further requires a Microsoft-compatible mouse or equivalent pointing device.

For laptops without RS232 interface, a converter from USB to RS 232 is used; once the converter has been connected to the USB2.0 interface and the corresponding driver has been installed, it serves as an RS232 connection. For PumpDrive 2/PumpDrive 2 Eco this converter is not required.

Licence and copy protection with WIBU key

Authorisation for changing parameters on the “Service” access level can be granted with a dongle. In order to protect the devices from being parameterised by untrained personnel, KSB uses a protective key (also known as a dongle) by the company Wibu-Systems. 

Customers using PumpDrive 2 or PumpDrive 2 Eco require a parameterisation cable (USB, optical) for connecting the device to the laptop.

Accessories overview

  • Authorisation dongle: accessory without software; e-mail for enabling the dongle
    support.servicetool@ksb.com 
    Ident. number: 47121256
  • Parameterisation cable (RS232)
    Ident. number: 47117698
  • Converter (USB2.0 to RS232)
    Ident. number: 01111255
  • Parameterisation cable PumpDrive 2 and PumpDrive 2 Eco:  (USB, optical)
    Ident. number: 01538436

General downloads ...

 ...for all KSB products used for pump automation!

User-defined downloads

The following downloads should only be used if you are already familiar with the use of the frame application PACTware and the drivers (DTM).

Calio / Calio Z

Calio

Calio V3

PumpMeter

PumpMeter for Etaline Z PumpDrive 2 / PumpDrive 2 Eco

BoosterControl Basic

BoosterControl Advanced

BoosterControl Advanced1.5

MegaControl III

PumpDrive

PumpDrive R

For parameterisation of the PumpDrive R the Danfoss software “MCT 10 Basic” in the variant for application with the Danfoss FC 202 series can be used: MCT 10 
Release key (KSB-CD-Key): 12320200

The setup of the field bus modules of PumpDrive R is done with the corresponding files used for the Danfoss FC202 series: Setup files field bus modules

MyFlowDrive

LevelControl für Hebeanlagen

LevelControl Basic 2

Level Control Advanced

Analyse-Tools

Analysis Tools

KSB’s analysis tools such as the KSB Sonolyzer® app support you in creating full transparency within your system and identifying potential savings in seconds.

Auslegungs-Tools

Configuration Tools

From the provision of CAD and BIM data to complex selection software for configuring optimum pumps and suitable valves: KSB offers you many tools for efficient system planning.

Know-how

Know-how

As a leading supplier of pumps, valves and services, KSB boasts comprehensive expertise. This generates valuable know-how that KSB is happy to share with you.