Ixo Pro Submersible borehole pump

Submersible borehole pump Ixo Pro

Multistage submersible borehole pump with integrated pressure switch, flow sensor and lift check valve. Electronic dry running protection with four consecutive start-up attempts; integrated capacitor. 15-metre H07 RN-F power cable with shockproof plug included.
See all documents and downloads

Main Applications

  • Rainwater harvesting
  • Pressure boosting
  • General irrigation systems
  • Water extraction

Technical Data

Maximum flow rate TSG
3.9 m3/h
Maximum head TSG
60 m
Max allow ds work.pressure TSG
6 bar, 12 bar
Max allowed fluid temp TSG
35 °C

Ваш контакт KSB: ми вам допоможемо

Вам потрібна допомога у пошуку потрібного идент.номера? Незабаром ви отримаєте список, щоб мати можливість розмістити замовлення самостійно.
Тим часом, будь ласка, зв’яжіться з нашою службою підтримки:
Тел.: +38 044 496 25 39

Your KSB contact : We’re here to support you

Benefits

  • Easy and convenient installation with integrated pressure switch and completely wired cable, including plug
  • Kit-Press (pressure switch connection set) extends the service life of the pump by preventing pressure surges in the discharge line and excessive starting/stopping.
  • Corrosion-resistant with pump shroud and impellers made of stainless steel AISI 304

Technical Data

Component function
Pump
Connection type Inlet
Internal-thread connection
Drive concept
With electric actuator
Maximum flow rate TSG
3.9 m3/h
Minimum flow rate TSG
0.1 m3/h
Maximum head TSG
60 m
Minimum head TSG
9 m
Mains frequency
50 Hz
Mains voltage
230 V
Mtrl Hydraulic casing
1.4301/AISI 304
Max allow ds work.pressure TSG
6 bar,
12 bar
Suction behaviour
Non-self-priming
Max allowed fluid temp TSG
35 °C
Min allowed fluid temp TSG
5 °C

Characteristic curves

Sectional Drawings