Amacan P Submersible pump in discharge tube

Submersible pump in discharge tube Amacan P

Wet-installed submersible motor pump for installation in discharge tubes, with axial propeller in ECB design, single-stage, single-entry. ATEX-compliant version available.
See all documents and downloads

Main Applications

  • Irrigation pumping stations
  • Drainage pumping stations
  • Stormwater pumping stations
  • Raw water pumps and clean water pumps in waterworks and waste water treatment plants

Technical Data

Maximum flow rate TSG
25200 m3/h
Maximum head TSG
12 m
Max allowed fluid temp TSG
40 °C

Ваш контакт KSB: ми вам допоможемо

Вам потрібна допомога у пошуку потрібного идент.номера? Незабаром ви отримаєте список, щоб мати можливість розмістити замовлення самостійно.
Тим часом, будь ласка, зв’яжіться з нашою службою підтримки:
Тел.: +38 044 496 25 39

Your KSB contact : We’re here to support you

Benefits

  • The pump’s own weight ensures self-centring seating in the discharge tube, and an O-ring seals it; quick to install or remove.
  • The slim motor keeps discharge tube flow losses down.
  • High reliability thanks to bearing temperature monitoring, vibration sensor, thermal motor protection, leakage sensors in the motor space and connection space as well as leakage monitoring of the mechanical seal system.

Technical Data

Drive concept
With electric actuator
Maximum flow rate TSG
25200 m3/h
Minimum flow rate TSG
0.1 m3/h
Maximum head TSG
12 m
Minimum head TSG
0.1 m
Mains frequency
50 Hz,
60 Hz
Mains voltage
380 V,
400 V,
460 V
Nominal pressure Outlet
PN 16
Suction behaviour
Non-self-priming
Max allowed fluid temp TSG
40 °C
Min allowed fluid temp TSG
2 °C