INVCP Vertical shaft submersible pump

Vertical shaft submersible pump INVCP

Vertical immersion pump for wet or dry installation, available with closed or semi-open impeller. Supplied with discharge pipe extending above the baseplate (INVCP) or without discharge pipe (INVCN). ATEX-compliant version available.
모든 문서와 다운로드 보기

기술 데이터

Maximum flow rate TSG
1600 m3/h
Maximum head TSG
100 m
Max allow ds work.pressure TSG
10 bar
Max allowed fluid temp TSG
100 °C

KSB 연락처: 항상 고객을 지원합니다.

올바른 제품 번호를 찾는 데 도움이 필요하십니까?
직접 주문이 가능하도록 빠른 시일 내에 컨텐츠를 제공할 예정입니다.
그동안 저희 지원팀에 문의해 주시기 바랍니다.

Your KSB contact : We’re here to support you

혜택

  • Oversized bearings make for long-term reliability.
  • Different pump designs and materials for a wide range of applications, e. g. bearing lubricated with fluid supplied from the outside
  • Clogging is prevented; suction problems are prevented caused by hindered flow through strainers

기술 데이터

Component function
Pump
Connection type Inlet
Flange
Drive concept
With electric actuator
Maximum flow rate TSG
1600 m3/h
Minimum flow rate TSG
0.6 m3/h
Maximum head TSG
100 m
Minimum head TSG
2.2 m
Mains frequency
50 Hz,
60 Hz
Mains voltage
230 V,
400 V,
460 V
Mtrl Hydraulic casing
A351 GRADE CF8M,
EN-GJL-250/A48 CL 35B
Nominal pressure Outlet
PN 10
Max allow ds work.pressure TSG
10 bar
Suction behaviour
Non-self-priming
Max allowed fluid temp TSG
100 °C
Min allowed fluid temp TSG
-10 °C