Etachrom L Dry-installed pump

Dry-installed pump Etachrom L

Horizontal single-stage circular casing pump, with ratings and main dimensions to EN 733, with replaceable casing wear rings and motor-mounted variable speed system. With KSB SuPremE, a magnetless synchronous reluctance motor (exception: motor sizes 0.55 kW / 0.75 kW with 1500 rpm are designed with permanent magnets) of efficiency class IE4/IE5 to IEC TS 60034-30-2:2016, for operation on a KSB PumpDrive 2 or KSB PumpDrive 2 Eco variable speed system without rotor position sensors. Motor mounting points in accordance with EN 50347, envelope dimensions in accordance with DIN V 42673 (07-2011). ATEX-compliant version available.
모든 문서와 다운로드 보기

주 사용 용도

  • Cleaning systems (bottle rinsing, crate washing and similar systems)
  • Water treatment systems
  • Water supply systems
  • Fire-fighting systems

기술 데이터

Maximum flow rate TSG
260 m3/h
Maximum head TSG
105 m
Max allow ds work.pressure TSG
12 bar
Max allowed fluid temp TSG
110 °C

KSB 연락처: 항상 고객을 지원합니다.

올바른 제품 번호를 찾는 데 도움이 필요하십니까?
직접 주문이 가능하도록 빠른 시일 내에 컨텐츠를 제공할 예정입니다.
그동안 저희 지원팀에 문의해 주시기 바랍니다.

Your KSB contact : We’re here to support you

혜택

  • Maintenance-free mechanical seal ensures operating reliability
  • Easy to dismantle due to back pull-out design; no need to remove the pump casing from the piping
  • Optimised hydraulic components for high efficiency help reduce energy consumption

증명서

  • E08A_5569654667-1_2
    Certified quality management to ISO 9001
    All countries
  • E08A_5569654667-2_2
    Approved in accordance with the French drinking water regulation
    France

기술 데이터

Component function
Pump
Connection type Inlet
Flange
Drive concept
With electric actuator
Maximum flow rate TSG
260 m3/h
Minimum flow rate TSG
2 m3/h
Maximum head TSG
105 m
Minimum head TSG
2 m
Mains frequency
50 Hz,
60 Hz
Mains voltage
400 V,
460 V
Mtrl Hydraulic casing
GX40CRNIMO27-5-X6CRNIMOTI17-12-2-STELLITE 6
Nominal pressure Outlet
PN 12
Max allow ds work.pressure TSG
12 bar
Suction behaviour
Non-self-priming
Max allowed fluid temp TSG
110 °C
Min allowed fluid temp TSG
-30 °C

단면도