Ixo Pro Submersible borehole pump

Submersible borehole pump Ixo Pro

Multistage submersible borehole pump with integrated pressure switch, flow sensor and lift check valve. Electronic dry running protection with four consecutive start-up attempts; integrated capacitor. 15-metre H07 RN-F power cable with shockproof plug included.
Lihat semua dokumen dan unduhan

Aplikasi utama

  • Rainwater harvesting
  • Pressure boosting
  • General irrigation systems
  • Water extraction

Data teknis

Maximum flow rate TSG
3.9 m3/h
Maximum head TSG
60 m
Max allow ds work.pressure TSG
6 bar, 12 bar
Max allowed fluid temp TSG
35 °C

Your KSB contact: We’re here to support you

Do you need any assistance finding the right material number?
We’ll soon provide a list so you can directly place your purchase order.
Meanwhile please contact our support:

Your local contact


Kontak KSB: Kami ada untuk Anda

Manfaat

  • Easy and convenient installation with integrated pressure switch and completely wired cable, including plug
  • Kit-Press (pressure switch connection set) extends the service life of the pump by preventing pressure surges in the discharge line and excessive starting/stopping.
  • Corrosion-resistant with pump shroud and impellers made of stainless steel AISI 304

Data teknis

Component function
Pump
Connection type Inlet
Internal-thread connection
Drive concept
With electric actuator
Maximum flow rate TSG
3.9 m3/h
Minimum flow rate TSG
0.1 m3/h
Maximum head TSG
60 m
Minimum head TSG
9 m
Mains frequency
50 Hz
Mains voltage
230 V
Mtrl Hydraulic casing
1.4301/AISI 304
Max allow ds work.pressure TSG
6 bar,
12 bar
Suction behaviour
Non-self-priming
Max allowed fluid temp TSG
35 °C
Min allowed fluid temp TSG
5 °C

Kurva karakteristik

Gambar penampang