(Etanorm pumps, pipes, valves and control units in the Stadtlohn-Hundewick waterworks)

More water pressure for Münsterland

Maintaining a high level of drinking water quality has been a top priority in Germany for decades, and almost all water supply utilities deliver this on a reliable basis. But another factor plays an equally important role in water supply: pressure. While water pressure drops and strong fluctuations are certainly a nuisance, they can also cause damage to appliances and equipment in households and industry. In order to avoid this, many water supply utilities have to adapt their pumping equipment to changing demand levels.

The project: Supplying Stadtlohn with sufficient water pressure

Stadtlohn’s utility SVS-Versorgungsbetriebe was struggling with fluctuating water pressure. At peak load times, water supply could no longer be guaranteed. Following a pressure drop of approx. 1 bar lasting over 3 hours, the decision was finally taken to redesign the clean water pumping station at the Stadtlohn-Hundewick waterworks. An additional objective was to achieve energy savings for the clean water pumps.

The customer: SVS-Versorgungsbetriebe

SVS-Versorgungsbetriebe provides the public energy and drinking water supply for the towns of Stadtlohn, Vreden and Südlohn (hence the name SVS), which are located in the western Münsterland region in the northwest of North Rhine-Westphalia. As well as providing electricity, natural gas and fibre-optic lines, SVS-Versorgungsbetriebe delivers an average of 2.9 million m³ of water per year to the local population as well as to industry, trade and agriculture via a network of pipelines stretching over 472.2 km.

(Multitec V pumps, pipes, valves and control units in the Stadtlohn-Hundewick waterworks)

Extremely space-saving, yet powerful: The Multitec V (front)

The challenge: Optimum water transport in confined spaces

The supply networks Stadtlohn and Südlohn lacked sufficient drinking water reserves. When quantities of around 400 – 440 m³/h were required, pressure dropped to 32 mWC and the clean water pumps were unable to transport the required quantity, despite the head of 42 mWC being clearly below their design point which at the time was known to be 54 mWC. The redesign also had to account for the extremely limited space available in the waterworks, which ruled out most horizontally installed pumps on the market.

The solution: Proven pumps with state-of-the-art control technology

The engineering company H2U was entrusted with the task of performing a fault analysis and developing a new plan. An extensive review of the performance data and an energy efficiency analysis of the waterworks yielded the following insights: The system lacked redundancy, offered unfavourable efficiencies and could not cope during high-demand periods as the pumping station was not designed for flow rates of more than 60 m³/h – even though these occurred 15% of the time.

The engineers decided to modify the piping and flow rates, with the work being carried out by the company A+H Anlagentechnik. The following factors were of primary importance: The system needed to become more flexible and energy efficient while offering a higher level of redundancy. In the Multitec V, KSB was able to offer a very efficient pump with frequency inverter (FI) which can also be operated via the latest high-tech interfaces. In addition, the pump can be installed vertically and thus fit perfectly into the confined space available. From a cost-benefit perspective, this was the best solution on the market. 

The entire waterworks now employs KSB SuPremE® motors controlled by frequency inverters. The water flow rates of the pumps controlled via frequency inverters can be read on the PumpDrive display. The frequency inverters can be operated very easily by means of a multi-line display and can also be set via Bluetooth using a smartphone. Using KSB SuPremE® motors also delivered the desired energy savings. Here, the frequency inverters are additionally used to calculate the pumped flow rates, removing the need to purchase electromagnetic flow meters.

The cooperation of all parties involved went so well that KSB has already converted another waterworks in Vreden to using KSB SuPremE® motors, PumpDrive 2 and KSB Guard.

(Etanorm pumps, pipes, valves and control units in the Stadtlohn-Hundewick waterworks)

Etanorm pumps (front) with PumpMeter, KSB Guard and PumpDrive (rear)

Figures I Data I Facts

System: Waterworks
End user: SVS-Versorgungsbetriebe

Project data:

  • 2x Multitec V
  • 3x Etanorm 
  • 5x PumpDrive 
  • 5x PumpMeter 
  • 5x KSB Guard 

Eingesetzte Produkte

Multitec

Multitec

Multistage horizontal or vertical centrifugal pump in ring-section design, long-coupled or close-coupled, with axial or radial suction nozzle, cast radial impellers and motor-mounted variable speed system. ATEX-compliant version available.

Etanorm

Etanorm

Horizontal volute casing pump, single-stage, with ratings and main dimensions to EN 733, long-coupled, back pull-out design, with replaceable shaft sleeves / shaft protecting sleeves and casing wear rings, with motor-mounted variable speed system. With KSB SuPremE, a magnetless synchronous reluctance motor (exception: motor sizes 0.55 kW / 0.75 kW with 1500 rpm are designed with permanent magnets) of efficiency class IE4/IE5 to IEC TS 60034-30-2:2016, for operation on a KSB PumpDrive 2 or KSB PumpDrive 2 Eco variable speed system without rotor position sensors. Motor mounting points in accordance with EN 50347, envelope dimensions in accordance with DIN V 42673 (07-2011). ATEX-compliant version available.

PumpDrive 2/PumpDrive 2 Eco

PumpDrive 2/PumpDrive 2 Eco

Modular self-cooling frequency inverter that enables continuously variable speed control of asynchronous and synchronous reluctance motors by means of analog standard signals, a field bus or the control panel. As PumpDrive is self-cooling, it can be mounted on a motor, on the wall or in a control cabinet. Up to six pumps can be controlled without needing an additional controller.

KSB - one of the world's leading manufacturers of industrial valves and pumps

Founded in 1871 in Frankenthal (Germany), KSB has been one of the leading suppliers of pumps and industrial valves for over 150 years. With more than 15,000 employees worldwide and its own sales and marketing, manufacturing facilities and service operations, KSB develops and produces custom-fit pumps for various applications.

As an experienced pump manufacturer, its product portfolio includes building and industrial technology, water transport, wastewater treatment and power plant processes. Thanks to innovative research and development, KSB can meet the most diverse requirements of customers. Benefit from many years of experience and technical expertise as a renowned pump manufacturer.

KSB pump manufacturers: the best solution for your plant
Industrial pumps and valves from KSB cover a wide range of applications and are highly energy-efficient. Products convince with the most innovative technology as well as with systems that have been tried and tested for many years - including the Etanorm water pump. Achieving more than 1.5 million sales worldwide, Etanorm is the most successful standard water pump. With KSB spare parts and services.

KSB ensures the operational reliability of its industrial pumps and valves. The KSB success formula for high-performance pumps lies in the technological strength in hydraulics, materials and automation.

Competent service right from the start
The numerous production facilities ensure that KSB as a pump manufacturer can guarantee customer proximity and first-class service. The experienced specialists are certified to ensure excellent quality and extensive experience. KSB Service takes care of the commissioning, inspection, servicing and maintenance of your pumps, valves and complete systems directly on site.  KSB also provide you with spare parts quickly. This means you get the best service directly from your pump manufacturer.